Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE AA 3201
- Product Form
- Ultraviolet adhesive
- Product Code
- 19728
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isobornyl acrylate | 5888-33-5 | 30 - 60% | Yes |
| 2-Hydroxyethyl methacrylate | 868-77-9 | 10 - 30% | Yes |
| Gamma-glycidoxypropyl trimethoxysilane | 2530-83-8 | 1 - 5% | Yes |
| diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide | 75980-60-8 | 1 - 5% | Yes |
| Silica, amorphous, fumed, cryst.-free | 112945-52-5 | 1 - 5% | Yes |
| 2-Propenoic acid, 2-methyl-, 2-(2-hydroxyethoxy)ethyl ester | 2351-43-1 | 0.1 - 1% | Yes |
| 2-Hydroxyethyl acrylate | 818-61-1 | 0.1 - 1% | Yes |
Notes
*Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.
Wash with soap and water. Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.
Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time. Get medical attention.
Do not induce vomiting. Keep individual calm. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Not available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Remove all sources of ignition. Do not allow product to enter sewer or waterways. Ventilate area.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a partly filled, closed container until disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in area provided with appropriate exhaust ventilation. Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not taste or swallow. Keep away from heat, spark and flame. Keep container closed. Wash thoroughly after handling.
Store between 10 °C (50°F) and 32 °C (89.6 °F). Store away from heat, sparks, flames, or other sources of ignition.
Wash thoroughly after handling.
Keep away from heat, spark and flame. Store away from heat, sparks, flames, or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use local ventilation if general ventilation is insufficient to maintain vapor concentration below established exposure limits.
Use impermeable gloves as necessary to prevent skin contact.
Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.
Use NIOSH approved respirator if there is potential to exceed exposure limit(s).
Use protective clothing as necessary to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Unstable.
Not available.
May occur.
Keep away from heat, ignition sources and incompatible materials. See "Handling and Storage" (Section 7) and "Incompatibility" (Section 10).
Strong oxidizing agents. Strong acids and strong bases.
Oxides of carbon. Oxides of nitrogen. Oxides of sulfur. Oxides of phosphorus. Irritating organic vapours. Dimethylamine.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (2,2-Dimethoxy-1,2-diphenylethan-1-one, Isobornyl acrylate)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE AA 3201?
The signal word is warning.
What is the physical form of LOCTITE AA 3201?
LOCTITE AA 3201 is a liquid with light yellow color. It has mild odor.
What is the solubility of LOCTITE AA 3201?
Slight Water, Miscible Acetone
What are the hazard statements for LOCTITE AA 3201?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE AA 3201?
The melting point is Not applicable, Product is a liquid and the boiling point is > 149 °C (> 300.2 °F).