Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE HC 9875 K10 AERO known as SYNCORE XHC 9875 K10
- Product Code
- SC9061521
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive for the Aerospace Industry
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epoxidized copolymer of phenol and substituted phenol | --- | 30 - 60% | Yes |
| Epoxy resin | --- | 10 - 30% | Yes |
| dapsone | 80-08-0 | 10 - 30% | Yes |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 1 - 5% | Yes |
| Epoxy resin | --- | 1 - 5% | Yes |
| Epoxy resin | --- | 1 - 5% | Yes |
| Epoxy resin | --- | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get medical attention. Do not induce vomiting.
Immediate Medical Attention
Get medical attention for inhalation, skin contact, and ingestion. Seek immediate medical attention for eye contact.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE HC 9872 K20 AERO known as SYNCORE HC 9872 K20
---
LOCTITE HC 9823 K20 AERO known as SYNCORE HC 9823 K20
---
LOCTITE EA 9820 60Z AERO SX
---
LOCTITE EA 9695 080K AERO
---
LOCTITE HC 3056 AERO PART A GAL
---
LOCTITE EA 9845LC 020-029 AERO known as HYSOL EA 9845 LSC 0.020/0.029 S
---
LOCTITE EF 9840 U50 AERO known as SYNSPAND 9840 U50 12IN X 24IN
---
LOCTITE EA 9820 60Z AERO
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Use only with adequate ventilation. For industrial use only. Do not breathe fumes or dust from this material.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation should effectively remove and prevent buildup of any dust generated from the handling of this product.
Wear impervious gloves for prolonged contact.
Safety goggles or safety glasses with side shields.
When dusts or thermal processing fumes are generated and ventilation is not sufficient to effectively remove them, appropriate NIOSH/MSHA approved respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Keep away from strong oxidizing agents, strong Lewis or mineral acids.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Epoxy resin, 4,4'-diamino diphenyl sulfone)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE HC 9875 K10 AERO known as SYNCORE XHC 9875 K10?
The signal word is danger.
What is the physical form of LOCTITE HC 9875 K10 AERO known as SYNCORE XHC 9875 K10?
LOCTITE HC 9875 K10 AERO known as SYNCORE XHC 9875 K10 is a solid with green color. It has mild odor.
What is the solubility of LOCTITE HC 9875 K10 AERO known as SYNCORE XHC 9875 K10?
Negligible
What is LOCTITE HC 9875 K10 AERO known as SYNCORE XHC 9875 K10 used for?
Adhesive for the Aerospace Industry
What are the hazard statements for LOCTITE HC 9875 K10 AERO known as SYNCORE XHC 9875 K10?
This substance has 6 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H350: MAY CAUSE CANCER.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE HC 9875 K10 AERO known as SYNCORE XHC 9875 K10?
The melting point is Not applicable and the boiling point is Not determined.