NextSDS Logo
Safety Data Sheet EN

BONDERITE M-NT 4595 CONVERSION COATING known as Alodine 4595 DR 202 Kg

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-NT 4595 CONVERSION COATING known as Alodine 4595 DR 202 Kg
Product Code
1621662

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Product for the conversion treatment of metals

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1C H314
Eye Dam. Cat. 1 H314

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Substituted polyhydroxy benzene derivative~ --- 1 - 5% Yes
1-Propoxy-2-propanol 1569-01-3 1 - 5% Yes
Methanol 67-56-1 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

For skin contact, flush with large amounts of water. Seek immediate medical attention.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical treatment necessary.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Seek immediate medical attention.

Medical Treatment

Immediate medical treatment necessary.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture and although it will exhibit a flash point, it will not support combustion.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid skin and eye contact. Wash thoroughly after handling. Avoid breathing vapors or mists of this product.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.

Hygiene

Wash thoroughly after handling.

Fire prevention

Do not handle or store near an open flame, heat or other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Orange
Colour Intensity
---
Form
---
Odor
mild
Odor Threshold
Not available.
Ph
3
Melting Point
Not determined
Boiling Point
> 100 °C (> 212°F) calculated
Flash Point
> 100 °C (> 212°F); Aqueous solution
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Vapor Pressure
Not determined
Vapor Density
---
Relative Density
1.01 - 1.04
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not available.
Solubility
Complete
Partition Coefficient
Not determined
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
4 % EPA Method 24
Metal Corrosion
---
Dynamic Viscosity
Not available.
Kinematic Viscosity
Not available.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

None identified.

Decomposition

Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3265
Shipping Name
Corrosive liquid, acidic, organic, n.o.s. (Cationic polymer)
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE M-NT 4595 CONVERSION COATING known as Alodine 4595 DR 202 Kg?

The signal word is danger.

What is the physical form of BONDERITE M-NT 4595 CONVERSION COATING known as Alodine 4595 DR 202 Kg?

BONDERITE M-NT 4595 CONVERSION COATING known as Alodine 4595 DR 202 Kg is a liquid with orange color. It has mild odor.

What is the solubility of BONDERITE M-NT 4595 CONVERSION COATING known as Alodine 4595 DR 202 Kg?

Complete

What is BONDERITE M-NT 4595 CONVERSION COATING known as Alodine 4595 DR 202 Kg used for?

Product for the conversion treatment of metals

What are the hazard statements for BONDERITE M-NT 4595 CONVERSION COATING known as Alodine 4595 DR 202 Kg?

This substance has 1 hazard statement:

  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE M-NT 4595 CONVERSION COATING known as Alodine 4595 DR 202 Kg?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.