Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B
- Product Code
- 1101476
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Hazardous Component(s) | CAS Number | Percentage* | | --- | --- | --- | | Gamma-glycidoxypropyl trimethoxysilane | 2530-83-8 | 90 - 100 | | Methanol | 67-56-1 | 1 - 5 |
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Gamma-glycidoxypropyl trimethoxysilane | 2530-83-8 | 90 - 100% | Yes |
| Methanol | 67-56-1 | 1 - 5% | Yes |
IDH number: 1101476 Product name: BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B <!-- PAGE 2 --> IDH number: 1101476 Product name: BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Flush with large amounts of water.
Rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Obtain medical attention if irritation persists (skin). Seek immediate medical attention (eyes). Immediate medical treatment necessary (ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
This product is combustible at high temperatures.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-NT 8800 PART A CR FREE CONVERSION COATING known as ALODINE® SG PART A
---
BONDERITE M-NT 5700 CR FREE CONVERSION COATING known as ALODINE 5700
---
BONDERITE M-NT 802 N CONVERSION COATING known as ALODINE 802 N EC650=RWE
---
BONDERITE M-NT 5700 AERO CR FREE CONVERSION COATING
---
BONDERITE M-NT 8453 CONVERSION COATING
---
BONDERITE M-NT 1455 RTU CR FREE CONVERSION COATING
---
BONDERITE M-NT 41042 CONVERSION COATING
---
BONDERITE M-NT 1455 CR FREE CONVERSION COATING known as BONDERITE 1455
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not take internally. Avoid breathing vapors or mists of this product. Avoid contact with water.
Keep container dry. Keep the container tightly closed and in a cool, well-ventilated place. Protect from freezing.
Wash thoroughly after handling.
Do not handle or store near an open flame, heat or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong oxidizing agents. Contact with water liberates methanol.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of silicon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B?
The signal word is danger.
What is the physical form of BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B?
BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B is a liquid with pale yellow color. It has solvent odor.
What is BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B used for?
Coating
What are the hazard statements for BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B?
This substance has 2 hazard statements:
- H318: CAUSES SERIOUS EYE DAMAGE.
- H370: CAUSES DAMAGE TO ORGANS.
What is the melting point of BONDERITE M-NT 8800 PART B CR FREE CONVERSION COATING AERO known as ALODINE® SG PART B?
The melting point is < -70 °C (< -94°F) and the boiling point is 290 °C (554°F)Supplier method.