Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 901NA-B1 AERO PART A QT
- Product Code
- 936986
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Part A of 2-K-Epoxy Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel
manufacturer
+1 (860) 571-5100
www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Hazardous Component(s) | CAS Number | Weight %* | | --- | --- | --- | | Epoxy resin | Proprietary | 30 - 60 | | Aluminum | 7429-90-5 | 30 - 60 | * Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epoxy resin | --- | 30 - 60% | Yes |
| Aluminum | 7429-90-5 | 30 - 60% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. DO NOT induce vomiting unless directed to do so by medical personnel.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. For the Part A plus Part B adhesive mixture, follow curing schedule as recommended in product literature. Do not heat Part A at temperatures greater than 100 °C (212 °F). This material may self-react at higher temperatures and cause an exotherm. The exotherm has the potential for release of excessive energy and toxic gasses. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
May occur.
To avoid thermal decomposition, do not overheat.
This product may react with strong acids or oxidizing agents. Amines.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Bisphenol-A Epichlorhydrin resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 901NA-B1 AERO PART A QT?
The signal word is warning.
What is the physical form of LOCTITE EA 901NA-B1 AERO PART A QT?
LOCTITE EA 901NA-B1 AERO PART A QT is a solid with gray green color. It has epoxy odor.
What is the solubility of LOCTITE EA 901NA-B1 AERO PART A QT?
Not soluble Water, Partially miscible ketones
What is LOCTITE EA 901NA-B1 AERO PART A QT used for?
Part A of 2-K-Epoxy Adhesive
What are the hazard statements for LOCTITE EA 901NA-B1 AERO PART A QT?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE EA 901NA-B1 AERO PART A QT?
The melting point is -15 °C (5°F) and the boiling point is > 200 °C (> 392°F).