Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 9394 AERO PART A QT
- Product Code
- 937059, AA9277016
- Synonyms
- EA 9394 PART A QUART
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive for the Aerospace Industry
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Alison Control Center
1-877-671-4200
Alison Control Center
1-303-992-1711
CHEMTREC
1-800-424-7/300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Aluminum | 7429-90-5 | 30 - 40% | No |
| Tetraglycidyl diaminodiphenylmethane | 28768-32-3 | 30 - 40% | No |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 20 - 30% | No |
| Modified epoxy resin | --- | 5 - 10% | No |
| Treated fumed silica | 67762-90-7 | 1 - 5% | No |
Notes
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected portion to fresh air. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious over having convulsions.
Immediate Medical Attention
Seek immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9394 AERO PART A QT
---
LOCTITE EA 9891RP AERO PART A QT
---
LOCTITE EA 9394 AERO PART B
---
LOCTITE EA 901NA-B1 AERO PART A QT
---
LOCTITE EA 9396 AERO PART A GAL
---
LOCTITE EA 9394.2 AERO PART A 200ML
---
LOCTITE EA 9695 080K AERO
---
LOCTITE EA 9394 AERO PART B 8OZ
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. For the Part A plus Part B adhesive mixture, follow curing schedule as recommended in product literature. Do not heat Part A at temperatures greater than 80 °C (176 °F). This material may self-react at higher temperatures and cause an exotherm. The exotherm has the potential for release of excessive energy and toxic gasses. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
May occur.
To avoid thermal decomposition, do not overheat.
Strong acids and oxidizing agents. Amines.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of according to Federal, State and local governmental regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Tetraglycidyl diaminodiphenylmethane, Bisphenol-A Epichlorhydrin resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE EA 9394 AERO PART A QT known by?
LOCTITE EA 9394 AERO PART A QT is also known as: EA 9394 PART A QUART
What is the hazard signal word for LOCTITE EA 9394 AERO PART A QT?
The signal word is warning.
What is the physical form of LOCTITE EA 9394 AERO PART A QT?
LOCTITE EA 9394 AERO PART A QT is a solid with gray color. It has mild odor.
What is LOCTITE EA 9394 AERO PART A QT used for?
Adhesive for the Aerospace Industry
What are the hazard statements for LOCTITE EA 9394 AERO PART A QT?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE EA 9394 AERO PART A QT?
The melting point is Not determined and the boiling point is Not determined.