Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM SNL-4 CUPPER LUBRICANT ACHESON
- Product Code
- 2573054
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Stearic acid ethylhexylester | 22047-49-0 | 10 - 30% | No |
| Palmitic acid, 2-ethylhexyl ester | 29806-73-3 | 10 - 30% | No |
| Tris(2-ethylhexyl) phosphate | 78-42-2 | 1 - 5% | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Seek medical advice. Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Obtain medical attention if irritation persists (skin). Seek medical advice (eye/ingestion).
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately. Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM SNL-2 CUPPER LUBRICANT ACHESON
---
BONDERITE L-FM SNL-3 CUPPER LUBRICANT ACHESON known as DTI SNL-3 CUPPERLUBE
---
BONDERITE L-FM SNL-50 CUPPER LUBRICANT ACHESON known as DTI SNL-50 CUPPER
---
BONDERITE L-FM TPS 600 CUPPER LUBRICANT ACHESON
---
BONDERITE L-FM CL-400 CUPPER LUBRICANT ACHESON known as CL-400
---
BONDERITE L-FM PL-A POST LUBRICANT ACHESON
---
BONDERITE L-FM F 1009 FORMING LUBRICANT ACHESON
---
BONDERITE L-FM 235 FORMING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store away from water, steam, ice, heat, oxidizing agents, and acids.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Strong oxidizing agents. Strong acids. Moisture.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of phosphorus. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FM SNL-4 CUPPER LUBRICANT ACHESON?
The signal word is warning.
What is the physical form of BONDERITE L-FM SNL-4 CUPPER LUBRICANT ACHESON?
BONDERITE L-FM SNL-4 CUPPER LUBRICANT ACHESON is a liquid with amber color. It has mild odor.
What is the solubility of BONDERITE L-FM SNL-4 CUPPER LUBRICANT ACHESON?
Disperses in water as emulsion Water
What is BONDERITE L-FM SNL-4 CUPPER LUBRICANT ACHESON used for?
Lubricant
What are the hazard statements for BONDERITE L-FM SNL-4 CUPPER LUBRICANT ACHESON?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-FM SNL-4 CUPPER LUBRICANT ACHESON?
The melting point is 0 °C (32°F) None and the boiling point is > 175 °C (> 347°F) calculated.