Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 565 PHOSPHATE ACCELERATOR known as NEUTRALIZER 565 1000KG CONT
- Product Code
- 251271
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Products for Conversion Processing
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Sodium hydroxide: 30 - 60 %
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydroxide | 1310-73-2 | 30 - 60% | Yes |
IDH number: 251271 Product name: BONDERITE M-AD 565 PHOSPHATE ACCELERATOR known as NEUTRALIZER 565 1000KG CONT
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. Get medical attention.
Immediately wash skin thoroughly with soap and water. Get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 1500CL NEUTRALIZER PA29KG
---
BONDERITE M-AD 134 ACCELERATOR DR265KG
---
BONDERITE M-AD 700 NEUTRALIZER ADDITIVE
---
BONDERITE M-AD 500 PRETREATMENT ADDITIVE known as NEUTRALIZER 500
---
BONDERITE M-AD 565 30kg TR
---
BONDERITE C-NE 7400F (US) NEUTRALIZER IBC1235KG
---
BONDERITE C-NE N NEUTRAL DESCALER PA26KG
---
BONDERITE L-AD 171 ACCELERATOR
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use caution when combining with water; DO NOT add water to acid, ALWAYS add acid to water while stirring to prevent release of heat, steam and fumes. For industrial use only. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Adding water to this product may cause localized overheating and splattering.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1824
- Shipping Name
- Sodium hydroxide solution
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-AD 565 PHOSPHATE ACCELERATOR known as NEUTRALIZER 565 1000KG CONT?
The signal word is danger.
What is the physical form of BONDERITE M-AD 565 PHOSPHATE ACCELERATOR known as NEUTRALIZER 565 1000KG CONT?
BONDERITE M-AD 565 PHOSPHATE ACCELERATOR known as NEUTRALIZER 565 1000KG CONT is a aqueous with colorless color. It has no valuation odor.
What is BONDERITE M-AD 565 PHOSPHATE ACCELERATOR known as NEUTRALIZER 565 1000KG CONT used for?
Products for Conversion Processing
What are the hazard statements for BONDERITE M-AD 565 PHOSPHATE ACCELERATOR known as NEUTRALIZER 565 1000KG CONT?
This substance has 2 hazard statements:
- H290: MAY BE CORROSIVE TO METALS.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE M-AD 565 PHOSPHATE ACCELERATOR known as NEUTRALIZER 565 1000KG CONT?
The melting point is Not applicable, Product is a liquid and the boiling point is 100 - 200 °C (212°F - 392°F) no method / method unknown.