Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 700 NEUTRALIZER ADDITIVE
- Synonyms
- PARCO NEUTRALIZER 700
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Ammonium bicarbonate | 1066-33-7 | 5 - 10
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammonium bicarbonate | 1066-33-7 | 5 - 10% | Yes |
| Non hazardous components | --- | --- | No |
IDH number: 594424 Product name: BONDERITE M-AD 700 NEUTRALIZER ADDITIVE known as PARCO NEUTRALIZER
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture and although it will exhibit a flash point, it will not support combustion.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-AD 500 PRETREATMENT ADDITIVE known as NEUTRALIZER 500
---
BONDERITE M-AD 1500CL NEUTRALIZER PA29KG
---
BONDERITE M-AD 43 Known as NEUTRALIZER 43
---
BONDERITE M-AD 43 PRETREATMENT ADDITIVE known as NEUTRALIZER 43
---
BONDERITE M-AD 4977B PRETREATMENT ADDITIVE known as ADDITIVE 4977B
---
BONDERITE M-AD 301 PRETREATMENT ADDITIVE
---
BONDERITE M-AD 300 PRETREATMENT ADDITIVE
---
BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin and eye contact. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Chemical resistant, impermeable gloves. Gloves should be tested to determine suitability for prolonged contact.
Wear chemical goggles; face shield (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Store away from incompatible materials.
This product may react with strong acids, bases and oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE M-AD 700 NEUTRALIZER ADDITIVE known by?
BONDERITE M-AD 700 NEUTRALIZER ADDITIVE is also known as: PARCO NEUTRALIZER 700
What is the hazard signal word for BONDERITE M-AD 700 NEUTRALIZER ADDITIVE?
The signal word is no signal word.
What is the physical form of BONDERITE M-AD 700 NEUTRALIZER ADDITIVE?
BONDERITE M-AD 700 NEUTRALIZER ADDITIVE is a liquid with colourless / colorless color. It has ammonia odor.
What is the solubility of BONDERITE M-AD 700 NEUTRALIZER ADDITIVE?
Complete
What is BONDERITE M-AD 700 NEUTRALIZER ADDITIVE used for?
Additive
What is the melting point of BONDERITE M-AD 700 NEUTRALIZER ADDITIVE?
The melting point is Not available. and the boiling point is >210 °F (>98.9 °C).