NextSDS Logo
Safety Data Sheet EN

LOCTITE ABLESTIK 5020K-1-005 known as Ablefilm 5020K-1-005 (5011)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE ABLESTIK 5020K-1-005 known as Ablefilm 5020K-1-005 (5011)
Product Code
1200624

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Epoxy adhesive

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Carc. Cat. 1A
STOT RE Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H350 MAY CAUSE CANCER.
H372 CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P260 Do not breathe dust.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Quartz (SiO2) respirable particulates (RCS) >=10% 14808-60-7 30 - 60% Yes
Rubberized epoxy --- 10 - 30% Yes
Glass, oxide, chemicals 65997-17-3 10 - 30% Yes
Epoxy resin --- 5 - 10% Yes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

Notes

Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention.

Skin contact

Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Sweep up or gather material and place in appropriate container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.

Storage

Store in a cool, dry, well-ventilated area. Store in original container until ready to use.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Density
---
Odor
Mild
Lower Explosive Limit
Not available.
Melting Point
Not determined
Upper Explosive Limit
Not available.
Physical State Data
solid
Freezing Point
---
Molecular Weight
---
Cloud Point
---
Solubility In Fat
---
Kinematic Viscosity
Not available.
Explosive Limits
---
Decomposition Temperature
Not available.
Ph
Not available.
Voc Content
< 0.3 % (calculated)
Bulk Density
---
Properties Status
---
Crystallisation Point
---
Density
---
Relative Evaporation Rate
---
Colour
Off white
Metal Corrosion
---
Physical State
Solid, Film
Auto Ignition Temperature
Not available.
State Under Standard Conditions
---
Relative Density
1.7
Appearance
---
Odor Threshold
Not available.
Vapor Pressure
Not applicable
Dynamic Viscosity
Not available.
Solidification Point
---
Boiling Point
Not available.
Flash Point
> 100 °C (> 212°F)
Solubility In Water
---
Flammability
Not applicable
Evaporation Rate
Not determined
Solubility
Insoluble Water
Partition Coefficient
Not available.
Form
---
Softening Point
---
Colour Intensity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

Strong oxidizing agents. Amines.

Decomposition

Oxides of carbon and nitrogen, aldehydes, acids and undetermined organics.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE ABLESTIK 5020K-1-005 known as Ablefilm 5020K-1-005 (5011)?

The signal word is danger.

What is the physical form of LOCTITE ABLESTIK 5020K-1-005 known as Ablefilm 5020K-1-005 (5011)?

LOCTITE ABLESTIK 5020K-1-005 known as Ablefilm 5020K-1-005 (5011) is a solid, film with off white color. It has mild odor.

What is the solubility of LOCTITE ABLESTIK 5020K-1-005 known as Ablefilm 5020K-1-005 (5011)?

Insoluble Water

What is LOCTITE ABLESTIK 5020K-1-005 known as Ablefilm 5020K-1-005 (5011) used for?

Epoxy adhesive

What are the hazard statements for LOCTITE ABLESTIK 5020K-1-005 known as Ablefilm 5020K-1-005 (5011)?

This substance has 5 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H350: MAY CAUSE CANCER.
  • H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of LOCTITE ABLESTIK 5020K-1-005 known as Ablefilm 5020K-1-005 (5011)?

The melting point is Not determined and the boiling point is Not available..