Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON PU U102 BONDMASTER known as BONDMASTER U102 TB 210KG
- Product Code
- 1323732
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Part B for 2-K-Polyurethane adhesive and sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methylenebis(phenylisocyanate) | 101-68-8 | 30 - 60% | Yes |
| 4,4'-Methylenediphenyl diisocyanate, homopolymer | 25686-28-6 | 10 - 30% | Yes |
| 4-isocyanatosulphonyltoluene | 4083-64-1 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Do not induce vomiting. Seek medical advice.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All common extinguishing agents are suitable.
In case of fire toxic gases can be released.
Wear self-contained breathing apparatus. Wear protective equipment.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
TEROSON PU U137 S DR240KG BONDMASTER
---
TEROSON PU U102 BONDMASTER
---
TEROSON PU U632 BONDMASTER known as BONDMASTER U632 DRUM OT 320 KG
---
TEROSON PU U142 BONDMASTER known as BONDMASTER U142 30KG PAIL
---
TEROSON PU U137 S BONDMASTER known as BONDMASTER U137 S 240KG DRUM ME
---
TEROSON PU U137 S BONDMASTER known as BONDMASTER U137 S 30KG PAIL FOI
---
TEROSON PU U137 S BONDMASTER known as BONDMASTER U137 S 30KG PAIL
---
TEROSON PU U632 BONDMASTER
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. For industrial use only. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Reaction with water, alcohols, amines.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON PU U102 BONDMASTER known as BONDMASTER U102 TB 210KG?
The signal word is danger.
What is the physical form of TEROSON PU U102 BONDMASTER known as BONDMASTER U102 TB 210KG?
TEROSON PU U102 BONDMASTER known as BONDMASTER U102 TB 210KG is a liquid with black color. It has typical odor.
What is TEROSON PU U102 BONDMASTER known as BONDMASTER U102 TB 210KG used for?
Part B for 2-K-Polyurethane adhesive and sealant
What are the hazard statements for TEROSON PU U102 BONDMASTER known as BONDMASTER U102 TB 210KG?
This substance has 5 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of TEROSON PU U102 BONDMASTER known as BONDMASTER U102 TB 210KG?
The melting point is Not applicable, Product is a liquid and the boiling point is 256 °C (492.8 °F).