Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE PC 7319 Part A known as Nordbak Chemical Resistant Coating
- Product Code
- 96092_10364000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy resin
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Bisphenol-F Epichlorhydrin resin | 9003-36-5 | 30 - 60% | Yes |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 30 - 60% | Yes |
| Titanium dioxide < 1% particles with diameter ≤ 10 µm | 13463-67-7 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up as much material as possible.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE PC 7303 A H/T PW RESIN known as Nordbak High Temp PneuWearRESIN
---
LOCTITE PC 7228 PART B known as Nordbak Brush Ceramic - White
---
LOCTITE PC 7516 B known as Nordbak Trowel Mix
---
LOCTITE PC 7337 Part B
---
Loctite Nordbak RESIN
---
LOCTITE 235598 A RESIN known as Nordbak FastCure PneuWear RESIN
---
LOCTITE PC 7234 Part B
---
LOCTITE PC 7222 Part A
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist.
Keep in a cool, well ventilated area.
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits.
Use chemical resistant, impermeable gloves.
Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.
Use NIOSH approved respirator if there is potential to exceed exposure limit(s).
Use chemical resistant, impermeable clothing including either an apron or body suit to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Store away from incompatible materials. Heat, flames, sparks and other sources of ignition. Elevated temperatures.
Strong oxidizing agents. Strong acids and strong bases. Amines.
Oxides of carbon. Aldehydes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE PC 7319 Part A known as Nordbak Chemical Resistant Coating?
The signal word is danger.
What is the physical form of LOCTITE PC 7319 Part A known as Nordbak Chemical Resistant Coating?
LOCTITE PC 7319 Part A known as Nordbak Chemical Resistant Coating is a liquid with gray / grey, black color. It has not significant odor.
What is the solubility of LOCTITE PC 7319 Part A known as Nordbak Chemical Resistant Coating?
Insoluble Water
What is LOCTITE PC 7319 Part A known as Nordbak Chemical Resistant Coating used for?
Epoxy resin
What are the hazard statements for LOCTITE PC 7319 Part A known as Nordbak Chemical Resistant Coating?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE PC 7319 Part A known as Nordbak Chemical Resistant Coating?
The melting point is Not applicable, Product is a liquid and the boiling point is Not applicable.