Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE MR GS1 GASKET SEALANT known as LOCTITE GS #1 3OZ EN
- Product Code
- 30511
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Kaolin | 1332-58-7 | 30 - 60% | Yes |
| rosin | 8050-09-7 | 10 - 30% | Yes |
| Methyl acetate | 79-20-9 | 10 - 30% | Yes |
| Castor oil, oxidized | 68187-84-8 | 5 - 10% | Yes |
| Titanium dioxide | 13463-67-7 | 1 - 5% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Wash clothing before reuse. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up as much material as possible.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE SEALANT 5699 GREY/50 ML
---
LOCTITE AA 5251 A known as LOCTITE® 5251A™ SEALANT PART N
---
LOCTITE VERDESEAL SBA PART A 1G
---
LOCTITE 962 1L.
---
LOCTITE 518 FLANGE SEALANT/ GASKET MAKER known as Loctite 518 25ML AU
---
LOCTITE SF 7909 1GAL
---
LOCTITE 5422 THREADSEALANT 50ML
---
LOCTITE SF 1768 1GAL EN/CH/JP
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Store away from incompatible materials. Heat, flames, sparks and other sources of ignition. Elevated temperatures.
Strong oxidizing agents. Strong acids and strong bases.
Oxides of carbon. Carboxylic acids. Aldehydes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE MR GS1 GASKET SEALANT known as LOCTITE GS #1 3OZ EN?
The signal word is danger.
What is the physical form of LOCTITE MR GS1 GASKET SEALANT known as LOCTITE GS #1 3OZ EN?
LOCTITE MR GS1 GASKET SEALANT known as LOCTITE GS #1 3OZ EN is a paste with mahogony color. It has ester-like odor.
What is the solubility of LOCTITE MR GS1 GASKET SEALANT known as LOCTITE GS #1 3OZ EN?
Partially soluble
What is LOCTITE MR GS1 GASKET SEALANT known as LOCTITE GS #1 3OZ EN used for?
Sealant
What are the hazard statements for LOCTITE MR GS1 GASKET SEALANT known as LOCTITE GS #1 3OZ EN?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
What is the melting point of LOCTITE MR GS1 GASKET SEALANT known as LOCTITE GS #1 3OZ EN?
The melting point is Not available. and the boiling point is Not available..