NextSDS Logo
Safety Data Sheet EN

LOCTITE SI 5903 BK 300ML

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE SI 5903 BK 300ML
Product Form
Sealant
Product Code
2283585

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Carc. Cat. 2
STOT RE Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H351 SUSPECTED OF CAUSING CANCER.
H373 MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P260 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium carbonate 471-34-1 30 - 60% Yes
Butan-2-one O,O',O''-(vinylsilyldyne)trioxime 2224-33-1 1 - 5% Yes
2-butanone oxime 96-29-7 1 - 5% Yes
Silanamine, 1,1,1-trimethyl-N-(trimethylsilyl)-, hydrolysis products with silica 68909-20-6 1 - 5% Yes
Carbon black - Nano 1333-86-4 0.1 - 1% Yes
Multifunctional polycarbodiimide~ --- 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

No specific treatment is necessary since material is not likely to be hazardous by inhalation. If symptoms develop and persist, get medical attention.

Skin contact

Wipe off paste with paper towel or cloth. Wash with soap and water.

Eye contact

Flush eyes with water as a precaution. If eye irritation persists, consult a specialist.

Ingestion

Do not induce vomiting. Consult a physician if necessary.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Scrape up as much material as possible. Store in a partly filled, closed container until disposal.

—

Related Products

Similar products with comparable safety profiles

L

LOCTITE SI 5900 BK CR300ML EN/D

---

L

LOCTITE SI 5970 BK 20L

---

L

LOCTITE SI 5900 BK known as 5900 BLACK silicone 300ml

---

L

LOCTITE SI 5900 BK HO20L M/L

---

L

LOCTITE SI 598 CR300ML

---

L

LOCTITE SI 5920

---

L

LOCTITE SI 5140 CR300ML

---

L

LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Do not wear contact lenses.

Storage

For safe storage, store between 8 °C (46.4 °F) and 28 °C (82.4 °F). Store in a dry area below 90° F.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Bulk Density
---
State Under Standard Conditions
---
Flash Point
> 93 °C (> 199.4 °F)
Decomposition Temperature
Not available.
Form
Paste
Kinematic Viscosity
Not available.
Melting Point
Not available.
Upper Explosive Limit
Not applicable
Density
1.28 at 20 °C (68°F)
Physical State
Paste, Liquid
Crystallisation Point
---
Dynamic Viscosity
Not available.
Molecular Weight
---
Properties Status
---
Evaporation Rate
Not applicable
Cloud Point
---
Physical State Data
liquid
Freezing Point
---
Boiling Point
> 260 °C (> 500°F)
Flammability
Not applicable
Solubility In Water
Insoluble
Auto Ignition Temperature
Not available.
Solidification Point
---
Appearance
---
Partition Coefficient
Not available.
Metal Corrosion
---
Solubility In Fat
---
Relative Density
1.28 at 20 °C (68°F)
Vapor Pressure
Not available.
Explosive Limits
---
Odor
Mild
Ph
Not available.
Softening Point
---
Vapor Density
---
Relative Evaporation Rate
---
Colour
Black
Lower Explosive Limit
Not applicable
Voc Content
4.01 %; 51 g/l
Colour Intensity
---
Solubility
Insoluble Water
Odor Threshold
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Excessive heat.

Incompatible

Acids and bases. Oxidizing agents.

Decomposition

Oxides of carbon. Oxides of silicon. Formaldehyde

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE SI 5903 BK 300ML?

The signal word is warning.

What is the physical form of LOCTITE SI 5903 BK 300ML?

LOCTITE SI 5903 BK 300ML is a paste, liquid with black color. It has mild odor.

What is the solubility of LOCTITE SI 5903 BK 300ML?

Insoluble Water

What are the hazard statements for LOCTITE SI 5903 BK 300ML?

This substance has 4 hazard statements:

  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H351: SUSPECTED OF CAUSING CANCER.
  • H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of LOCTITE SI 5903 BK 300ML?

The melting point is Not available. and the boiling point is > 260 °C (> 500°F).