Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML
- Product Code
- 1252931
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Silicone sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 60 - 80% | Yes |
| Triethoxy(vinyl)silane | 78-08-0 | 1 - 5% | Yes |
| 3-aminopropyltriethoxysilane | 919-30-2 | 1 - 5% | Yes |
| Quartz (SiO2) | 14808-60-7 | 0.1 - 1% | Yes |
| 1,1,1,3,3,3-Hexamethyldisilazane | 999-97-3 | 0.1 - 1% | Yes |
| Carbon black - Nano | 1333-86-4 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.
Wash with soap and water. Wipe off paste with paper towel or cloth.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Do not induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Maintain good ventilation for large spills.
Do not allow product to enter sewer or waterways.
Scrape up as much material as possible. Spilled material will solidify. Store in a partly filled, closed container until disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.
Keep container closed. Store in a dry area.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Prolonged heating at temperatures above 150 °C. Exposure to moisture.
Oxidizing agents. Bases. Acids. Water.
Formaldehyde Oxides of carbon. Oxides of silicon. Irritating vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML?
The signal word is warning.
What is the physical form of LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML?
LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML is a paste with gray / grey color. It has mild odor.
What is the solubility of LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML?
Insoluble Water
What is LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML used for?
Silicone sealant
What are the hazard statements for LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE SI 5607 B known as LOCTITE 5607 SIL PTB 400ML?
The melting point is Not applicable, Determination technically not possible and the boiling point is Not applicable, Decomposes before boiling point is reached.