Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ED EA1010
- Product Form
- Additive
- Product Code
- 598125
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air.
Remove contaminated clothing and footwear. For skin contact, flush with large amounts of water.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.
Give one to two glasses of water or milk.
Immediate Medical Attention
If symptoms develop and persist, get medical attention. Seek immediate medical attention for skin and eye contact. Seek medical advice for ingestion.
Medical Treatment
The hemolytic effect of sodium chlorate makes it a strong inducer of methemoglobinemia, against which methylene blue is not effective, except in the early stages.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water only.
Do not use dry chemicals, carbon dioxide, or foam.
Oxidizing agent, may cause spontaneous ignition of combustible materials.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only. Do not mix this chemical or solutions of this chemical with hydrochloric acid (muriatic acid). May liberate chlorine gas.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation should effectively remove and prevent buildup of any vapor/mist/fume/dust generated from the handling of this product.
Wear impervious gloves for prolonged contact. Gloves should be tested to determine suitability for prolonged contact.
Wear chemical goggles; face shield (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong alkalies. Do not mix this chemical or solutions of this chemical with hydrochloric acid (muriatic acid). May liberate chlorine gas. Do not allow chemical to dry in the presence of organic materials.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3139
- Shipping Name
- Oxidizing liquid, n.o.s. (Sodium nitrate, Sodium chlorate)
- Transport Class
- 5.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-ED EA1010?
The signal word is warning.
What is the physical form of BONDERITE M-ED EA1010?
BONDERITE M-ED EA1010 is a liquid with colourless / colorless color. It has neutral odor.
What is the solubility of BONDERITE M-ED EA1010?
Complete Water
What are the hazard statements for BONDERITE M-ED EA1010?
This substance has 2 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE M-ED EA1010?
The melting point is Not determined and the boiling point is > 107.2 °C (> 225°F)calculated.