NextSDS Logo
Safety Data Sheet EN

BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 MAKEUP

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 MAKEUP
Product Form
Coating
Product Code
594960

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

OXIDIZING LIQUID Cat. 2
Met. Corr. Cat. 1
Acute Tox. Cat. 4
Acute Tox. Cat. 3
Skin Corr. Cat. 1B
Eye Dam. Cat. 1
Resp. Sens. Cat. 1
Skin Sens. Cat. 1
Muta. Cat. 2
Carc. Cat. 1A
Repr. Cat. 1B
STOT RE Cat. 1

GHS Pictograms

GHS03 - Oxidizing

GHS03

GHS05 - Corrosive

GHS05

GHS06 - Acute toxicity

GHS06

GHS08 - Serious health hazard

GHS08

Hazard Statements

H272 MAY INTENSIFY FIRE; OXIDIZER.
H290 MAY BE CORROSIVE TO METALS.
H302 HARMFUL IF SWALLOWED.
H311 TOXIC IN CONTACT WITH SKIN.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H334 MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
H341 SUSPECTED OF CAUSING GENETIC DEFECTS.
H350 MAY CAUSE CANCER.
H360 MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
H372 CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P220 Keep away from clothing and other combustible materials.
P234 Keep only in original packaging.
P260 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P284 [In case of inadequate ventilation] wear respiratory protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a poison center or physician.
P361 + P364 Take off immediately all contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell. Rinse mouth.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

The data for this section has not been processed yet.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Remove contaminated clothing and footwear. Rinse with large amounts of running water. If iced 0.13% benzalkonium chloride (Zephiran) solution or 2.5% calcium gluconate gel are available, the rinsing may be limited to 5 minutes, with the soaks or gel applied as soon as the rinsing is stopped. If benzalkonium chloride or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.

Ingestion

Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

GET MEDICAL ATTENTION IMMEDIATELY! Seek immediate medical attention. In case of adverse health effects seek medical advice. Get immediate medical attention.

Medical Treatment

If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value. Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide. Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses. This product is an aqueous mixture which will not burn.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Manufacturer recommends storing above 4.4 °C (40 °F). Thaw and mix thoroughly if frozen.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Dynamic Viscosity
Not available.
Appearance
---
Physical State Data
liquid
Explosive Limits
---
Colour
Green
Decomposition Temperature
Not available.
Odor
Sour/Acid
Physical State
liquid
Solubility In Water
---
Solubility
Complete
Melting Point
Not available.
Ph
< 2
Lower Explosive Limit
Not applicable
Boiling Point
> 100 °C (> 212°F)
Vapor Pressure
Not determined
Vapor Density
---
Relative Density
1.32 - 1.38
Form
---
Relative Evaporation Rate
---
Odor Threshold
Not available.
Density
---
Auto Ignition Temperature
Not applicable
Softening Point
---
Cloud Point
---
Bulk Density
---
Freezing Point
---
Metal Corrosion
---
Evaporation Rate
Not determined
Crystallisation Point
---
Voc Content
Not applicable
Flash Point
Not applicable
Kinematic Viscosity
Not available.
Partition Coefficient
Not available.
Colour Intensity
---
State Under Standard Conditions
---
Molecular Weight
---
Flammability
Not applicable
Properties Status
---
Solubility In Fat
---
Solidification Point
---
Upper Explosive Limit
Not applicable
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong alkalies. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. May liberate hydrogen fluoride.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3264
Shipping Name
Corrosive liquid, acidic, inorganic, n.o.s. (Fluorosilicic acid, Phosphoric acid)
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 MAKEUP?

The signal word is danger.

What is the physical form of BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 MAKEUP?

BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 MAKEUP is a liquid with green color. It has sour/acid odor.

What is the solubility of BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 MAKEUP?

Complete

What are the hazard statements for BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 MAKEUP?

This substance has 11 hazard statements:

  • H272: MAY INTENSIFY FIRE; OXIDIZER.
  • H290: MAY BE CORROSIVE TO METALS.
  • H302: HARMFUL IF SWALLOWED.
  • H311: TOXIC IN CONTACT WITH SKIN.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
  • H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
  • H350: MAY CAUSE CANCER.
  • H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
  • H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 MAKEUP?

The melting point is Not available. and the boiling point is > 100 °C (> 212°F).