Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-CA 696 220KG AN
- Product Code
- 2092293
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Release agent
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy paraffinic | 64742-54-7 | 10 - 30% | Yes |
| Titanium dioxide | 13463-67-7 | 10 - 30% | Yes |
| Graphite | 7782-42-5 | 10 - 30% | Yes |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic < 3%DMSO | 64742-65-0 | 10 - 30% | Yes |
| Silica, amorphous, fumed, cryst.-free | 112945-52-5 | 1 - 5% | Yes |
| Silica Filler | 112926-00-8 | 1 - 5% | Yes |
| Aluminium hydroxide | 21645-51-2 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Immediately flush skin with plenty of water (using soap, if available).
Rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Obtain medical attention if irritation persists (skin). Seek immediate medical attention (eyes). If material is ingested, immediately contact a physician or poison control center.
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, foam, powder
Not available.
This product is combustible at high temperatures.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Do not pressurize, cut, heat or weld containers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
None under normal processing.
Store away from incompatible materials. High temperatures.
Reaction with strong oxidants.
None if used for intended purpose. In case of fire toxic gases can be released.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-CA 696 220KG AN?
The signal word is danger.
What is the physical form of BONDERITE L-CA 696 220KG AN?
BONDERITE L-CA 696 220KG AN is a liquid with gray / grey color. It has oily odor.
What is the solubility of BONDERITE L-CA 696 220KG AN?
Insoluble Water; Negligible
What is BONDERITE L-CA 696 220KG AN used for?
Release agent
What are the hazard statements for BONDERITE L-CA 696 220KG AN?
This substance has 3 hazard statements:
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-CA 696 220KG AN?
The melting point is Not applicable, Product is a liquid and the boiling point is > 200 °C (> 392°F).