NextSDS Logo
Safety Data Sheet EN

BONDERITE L-CA CG 595 PA20KG AN

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE L-CA CG 595 PA20KG AN
Product Form
Metal casting product
Product Code
2092742

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Metal casting product

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1
STOT SE Cat. 3

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H318 CAUSES SERIOUS EYE DAMAGE.
H335 MAY CAUSE RESPIRATORY IRRITATION.

Precautionary Statements

P233 Keep container tightly closed.
P261 Avoid breathing vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, eye protection, and face protection.
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312 Call a POISON CENTER or physician if you feel unwell.
P332 + P313 If skin irritation occurs: Get medical attention.
P338 Remove contact lenses, if present and easy to do.
P338 Continue rinsing.
P351 IF IN EYES: Rinse cautiously with water for several minutes.
P352 IF ON SKIN: Wash with plenty of water.
P362 Take off contaminated clothing.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Notes

Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. For industrial use only. Do not take internally.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
---
Decomposition Temperature
Not available.
Vapor Pressure
Not available.
Colour
Milky white
Bulk Density
---
Solidification Point
---
Molecular Weight
---
Physical State
Liquid
Explosive Limits
---
Solubility
---
Odor Threshold
Not available.
Auto Ignition Temperature
Not available.
Upper Explosive Limit
Not available.
Melting Point
Not available.
Boiling Point
Not available.
Freezing Point
---
Colour Intensity
---
Dynamic Viscosity
Not available.
Partition Coefficient
Not available.
State Under Standard Conditions
---
Cloud Point
---
Solubility In Water
Miscible
Relative Evaporation Rate
---
Softening Point
---
Solubility In Fat
---
Evaporation Rate
Not available.
Flash Point
No flash point up to 100°C. Aqueous preparation.
Kinematic Viscosity
Not available.
Odor
neutral
Voc Content
Not available.
Lower Explosive Limit
Not available.
Ph
8
Physical State Data
liquid
Appearance
---
Crystallisation Point
---
Form
---
Vapor Density
Not available.
Flammability
Not applicable
Density
---
Properties Status
---
Metal Corrosion
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids or oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE L-CA CG 595 PA20KG AN?

The signal word is danger.

What is the physical form of BONDERITE L-CA CG 595 PA20KG AN?

BONDERITE L-CA CG 595 PA20KG AN is a liquid with milky white color. It has neutral odor.

What is BONDERITE L-CA CG 595 PA20KG AN used for?

Metal casting product

What are the hazard statements for BONDERITE L-CA CG 595 PA20KG AN?

This substance has 3 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H318: CAUSES SERIOUS EYE DAMAGE.
  • H335: MAY CAUSE RESPIRATORY IRRITATION.

What is the melting point of BONDERITE L-CA CG 595 PA20KG AN?

The melting point is Not available. and the boiling point is Not available..