NextSDS Logo
Safety Data Sheet EN

TEROSON PU 8511 GLASPRIMER known as TEROSTAT 8511 GLASPRIMER 100ML

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON PU 8511 GLASPRIMER known as TEROSTAT 8511 GLASPRIMER 100ML
Product Form
Primer
Product Code
148785

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 HIGHLY FLAMMABLE LIQUID AND VAPOR.
H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H335 MAY CAUSE RESPIRATORY IRRITATION.
H336 MAY CAUSE DROWSINESS OR DIZZINESS.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P233 Keep container tightly closed.
P233 Keep container tightly closed.
P235 Keep cool.
P241 Use explosion-proof equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Avoid breathing vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 No release into water.
P280 Wear protective gloves, eye protection, and face protection.
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312 Call a POISON CENTER or physician if you feel unwell.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P338 Remove contact lenses, if present and easy to do. Continue rinsing.
P351 IF IN EYES: Rinse cautiously with water for several minutes.
P361 If on skin (or hair): Take off immediately all contaminated clothing.
P362 Take off contaminated clothing.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Propyl acetate 109-60-4 20 - 30% Yes
Ethyl acetate 141-78-6 20 - 30% Yes
1,3-Bis(isocyanatomethyl)cyclohexane, trimethylolpropane copolymer 39527-44-1 20 - 30% Yes
Carbon black 1333-86-4 10 - 20% Yes
n-Butyl acetate 123-86-4 5 - 10% Yes
Tetraethyl silicate 78-10-4 1 - 5% Yes
N-(3-(Trimethoxysilyl)propyl)ethylenediamine 1760-24-3 1 - 5% Yes
n-Hexane 110-54-3 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Consult a physician should this development occur.

Skin contact

Immediately wash skin thoroughly with soap and water. If adverse health effects develop seek medical attention. Launder contaminated clothing before reuse.

Eye contact

Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Immediately contact a physician or poison control center. Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Seek immediate medical attention for eye contact. Immediately contact a physician or poison control center for ingestion.

Medical Treatment

If breathing is difficult, give oxygen. Treat affected person appropriately. Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

DANGEROUS when exposed to heat or flame. This material can be ignited by flame or spark under all normal atmospheric conditions.

Instructions

Wear self-contained breathing apparatus. Wear full protective clothing.

Firefighter Protection

Wear self-contained breathing apparatus. Wear full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Eliminate all sources of ignition or flammables that may come into contact with a spill of this material. Prevent further leakage or spillage if safe to do so.

Cleanup methods

Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container.

Materials: inert absorbent such as sand or vermiculite

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Keep container closed. Use only with adequate ventilation. Wash thoroughly after handling. Avoid naked flames, sparking and sources of ignition. Use proper bonding and/or grounding procedures.

Storage

Keep the container tightly closed and in a cool, well-ventilated place.

Hygiene

Wash thoroughly after handling.

Fire prevention

Avoid naked flames, sparking and sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flammability
Not applicable
Flash Point
-4 °C (24.8 °F) DIN 51755 Closed cup flash point
Ph
Not available.
Melting Point
Not available.
Dynamic Viscosity
---
Appearance
---
Lower Explosive Limit
Not available.
Metal Corrosion
---
State Under Standard Conditions
---
Evaporation Rate
Not available.
Physical State Data
liquid
Kinematic Viscosity
---
Explosive Limits
---
Relative Evaporation Rate
---
Colour
Black
Odor
Solvent
Vapor Pressure
Not available.
Colour Intensity
---
Decomposition Temperature
Not available.
Vapor Density
---
Solidification Point
---
Form
---
Partition Coefficient
Not available.
Auto Ignition Temperature
Not available.
Freezing Point
---
Physical State
Liquid
Voc Content
61.00 %
Molecular Weight
---
Softening Point
---
Relative Density
0.98 at 25.00 °C (77°F)
Density
---
Solubility
---
Boiling Point
77 °C (170.6 °F)no method
Upper Explosive Limit
Not available.
Properties Status
---
Odor Threshold
Not available.
Cloud Point
---
Crystallisation Point
---
Solubility In Fat
---
Bulk Density
---
Solubility In Water
Insoluble
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Reacts with water. Amines. Alcohols.

Hazardous reactions

None under normal processing.

Avoid

Heat, flames, sparks and other sources of ignition. Humidity.

Incompatible

Oxidizers.

Decomposition

carbon oxides. Isocyanates. Acetic acid

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1139
Shipping Name
Coating solution
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON PU 8511 GLASPRIMER known as TEROSTAT 8511 GLASPRIMER 100ML?

The signal word is danger.

What is the physical form of TEROSON PU 8511 GLASPRIMER known as TEROSTAT 8511 GLASPRIMER 100ML?

TEROSON PU 8511 GLASPRIMER known as TEROSTAT 8511 GLASPRIMER 100ML is a liquid with black color. It has solvent odor.

What are the hazard statements for TEROSON PU 8511 GLASPRIMER known as TEROSTAT 8511 GLASPRIMER 100ML?

This substance has 6 hazard statements:

  • H225: HIGHLY FLAMMABLE LIQUID AND VAPOR.
  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H335: MAY CAUSE RESPIRATORY IRRITATION.
  • H336: MAY CAUSE DROWSINESS OR DIZZINESS.

What is the melting point of TEROSON PU 8511 GLASPRIMER known as TEROSTAT 8511 GLASPRIMER 100ML?

The melting point is Not available. and the boiling point is 77 °C (170.6 °F)no method.