NextSDS Logo
Safety Data Sheet EN

TEROSON PU 8590 UHV known as TEROSTAT 8590 UHV SP 600ML

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON PU 8590 UHV known as TEROSTAT 8590 UHV SP 600ML
Product Code
1196191

Regulatory Identifiers

CAS Number
N/A

Identified Uses

1-component-polyurethane adhesive

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Resp. Sens. Cat. 1
Skin Sens. Cat. 1
Carc. Cat. 1A

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H334 MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P284 [In case of inadequate ventilation] wear respiratory protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a poison center or physician.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Oxirane, methyl-, polymer with oxirane, ether with 1,2,3-propanetriol (3:1), polymer with 1,1'-methylenebis[4-isocyanatobenzene] 59675-67-1 10 - 30% Yes
Carbon black - Nano 1333-86-4 10 - 30% Yes
Limestone 1317-65-3 10 - 30% Yes
Methylenebis(phenylisocyanate) 101-68-8 0.1 - 1% Yes
Quartz (SiO2), <1% respirable 14808-60-7 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Surfaces may become slippery after spillage. Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Provide adequate ventilation. Do not take internally. For industrial use only.

Storage

Store between 15.0 °C (59°F) and 25.0 °C (77°F). Ensure adequate ventilation, especially in confined areas. Keep away from heat and direct sunlight. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep away from heat.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Flash Point
Not applicable
Solubility In Fat
---
Density
---
Metal Corrosion
---
Odor
Mild, Specific
Freezing Point
---
Decomposition Temperature
Not available.
Melting Point
Not applicable, Determination technically not possible
Kinematic Viscosity
Not available.
Solubility
Insoluble Water
Colour
Black
State Under Standard Conditions
---
Odor Threshold
Not available.
Flammability
The product is not flammable.
Colour Intensity
---
Properties Status
---
Evaporation Rate
Not available.
Relative Evaporation Rate
---
Cloud Point
---
Softening Point
---
Physical State
Solid
Voc Content
0 %
Explosive Limits
---
Relative Density
1.28
Solidification Point
---
Dynamic Viscosity
6,200,000 - 7,200,000 mPa.s
Auto Ignition Temperature
Not available.
Vapor Density
---
Solubility In Water
---
Appearance
---
Lower Explosive Limit
Not available.
Boiling Point
Not applicable, Decomposes > 140°C (284°F).
Physical State Data
liquid
Upper Explosive Limit
Not available.
Vapor Pressure
< 0.1 hPa (20 °C (68°F))
Form
---
Ph
Not applicable, Product reacts with water.
Molecular Weight
---
Bulk Density
---
Partition Coefficient
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Excessive heat. Humidity.

Incompatible

Reacts with water: Pressure built up in closed vessel (CO2). Alcohol. Amines.

Decomposition

At higher temperatures toxic gases may be generated. Isocyanate vapors

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON PU 8590 UHV known as TEROSTAT 8590 UHV SP 600ML?

The signal word is danger.

What is the physical form of TEROSON PU 8590 UHV known as TEROSTAT 8590 UHV SP 600ML?

TEROSON PU 8590 UHV known as TEROSTAT 8590 UHV SP 600ML is a solid with black color. It has mild, specific odor.

What is the solubility of TEROSON PU 8590 UHV known as TEROSTAT 8590 UHV SP 600ML?

Insoluble Water

What is TEROSON PU 8590 UHV known as TEROSTAT 8590 UHV SP 600ML used for?

1-component-polyurethane adhesive

What are the hazard statements for TEROSON PU 8590 UHV known as TEROSTAT 8590 UHV SP 600ML?

This substance has 5 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
  • H350: MAY CAUSE CANCER.

What is the melting point of TEROSON PU 8590 UHV known as TEROSTAT 8590 UHV SP 600ML?

The melting point is Not applicable, Determination technically not possible and the boiling point is Not applicable, Decomposes > 140°C (284°F)..