NextSDS Logo
Safety Data Sheet EN

BONDERITE L-CA SQ-10 PA20KG ACHESON

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE L-CA SQ-10 PA20KG ACHESON
Product Code
2811379

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1 H317

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 MAY CAUSE AN ALLERGIC SKIN REACTION.

Precautionary Statements

P261 Avoid breathing mist/vapours.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Carboxymethyl cellulose, sodium salt 9004-32-4 1 - 5% Yes
Tris(2-hydroxyethyl)hexahydro triazine 4719-04-4 0.1 - 1% Yes
Graphite 7782-42-5 10 - 30% Yes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Immediately remove victim to fresh air.

Skin contact

Immediately wash skin thoroughly with soap and water.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel.

Immediate Medical Attention

If symptoms develop and persist, get medical attention. Seek immediate medical attention (for eye contact). Get medical attention (for ingestion).

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Not available.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Freezing Point
---
Molecular Weight
---
Decomposition Temperature
Not available.
Ph
>= 10.0
Vapor Density
---
Flash Point
Not applicable
Physical State
Liquid
Relative Density
1.14 - 1.16
Partition Coefficient
Not determined
Kinematic Viscosity
Not available.
Softening Point
---
Form
---
Flammability
Not applicable
Odor Threshold
Not available.
Crystallisation Point
---
Dynamic Viscosity
200 - 500 cp
Odor
Ammoniacal
Metal Corrosion
---
Explosive Limits
---
Cloud Point
---
Colour
Black
Appearance
---
Melting Point
<= 0 °C (<= 32°F)
Solubility In Fat
---
Voc Content
Not determined
Density
---
State Under Standard Conditions
---
Bulk Density
---
Properties Status
---
Vapor Pressure
Not determined
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Colour Intensity
---
Auto Ignition Temperature
Not applicable
Evaporation Rate
1 (Water = 1)
Solidification Point
---
Solubility
Completely soluble Water
Physical State Data
liquid
Solubility In Water
Completely soluble
Boiling Point
>= 100 °C (>= 212°F) calculated
Relative Evaporation Rate
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Elevated temperatures. Freezing conditions.

Incompatible

This product reacts with acids.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE L-CA SQ-10 PA20KG ACHESON?

The signal word is warning.

What is the physical form of BONDERITE L-CA SQ-10 PA20KG ACHESON?

BONDERITE L-CA SQ-10 PA20KG ACHESON is a liquid with black color. It has ammoniacal odor.

What is the solubility of BONDERITE L-CA SQ-10 PA20KG ACHESON?

Completely soluble Water

What is BONDERITE L-CA SQ-10 PA20KG ACHESON used for?

Lubricant

What are the hazard statements for BONDERITE L-CA SQ-10 PA20KG ACHESON?

This substance has 1 hazard statement:

  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.

What is the melting point of BONDERITE L-CA SQ-10 PA20KG ACHESON?

The melting point is <= 0 °C (<= 32°F) and the boiling point is >= 100 °C (>= 212°F) calculated.