Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE 408 INSTANT ADHESIVE known as Loctite 408 20g EN/CH/JP
- Product Code
- 42695
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Beta-Methoxyethyl Cyanoacrylate | 27816-23-5 | 80 - 100% | Yes |
| Bis(2-hydroxy-3-tert-butyl-5-methylphenyl)methane | 119-47-1 | 0.1 - 1% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice. If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel.
Rinse with running water and soap. Do not pull bonded skin apart. It may be gently peeled apart using a blunt object such as a spoon, preferably after soaking in warm soapy water. If lips are accidentally stuck together apply warm water to the lips and encourage maximum wetting and pressure from saliva inside the mouth. Peel or roll lips apart. Do not try to pull the lips apart with direct opposing action. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately. Do not force eye open.
Symptoms: solid particles of cyanoacrylate trapped behind the eyelid cause any abrasive damage
Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person. Ensure breathing passages are not obstructed. The product will polymerize rapidly and bond to the mouth making it almost impossible to swallow. Saliva will separate any solidified product in several hours. Prevent the patient from swallowing any separated mass.
Symptoms: bonded to the mouth
Immediate Medical Attention
Seek immediate medical attention.
Medical Treatment
Surgery is not necessary to separate accidentally bonded tissues. Experience has shown that bonded tissues are best treated by passive, non-surgical first aid. If rapid curing has caused thermal burns they should be treated symptomatically after adhesive is removed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures appropriate to local circumstances and the surrounding environment. Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways. Prevent further leakage or spillage if safe to do so.
Flood with water to complete polymerization and scrape off the floor.
Materials: water
Related Products
Similar products with comparable safety profiles
LOCTITE 407 LOW VISCOSITY known as 407 INSTANT ADHESIVE IN JP 50
---
LOCTITE 480 INSTANT ADHESIVE known as 480 CA INSTANT ADHESIVE 20 G
---
LOCTITE 2701 known as Loctite 2701 50ML EN/CH/JP
---
Loctite 7452 1.75oz EN/CH/JP
---
LOCTITE 406 WICKING GRADE INSTANT ADHESIVE known as Loctite 406 500ML AU
---
LOCTITE SF 1768 1GAL EN/CH/JP
---
Loctite 4105 Instant Adhesive
---
LOCTITE DSP 3214 TEMPORARY BONDING known as Loctite 3214 2L N/CH/JP
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed. Avoid contact with fabric or paper goods. Contact with these materials may cause rapid polymerization which can generate smoke and strong irritating vapors, and cause thermal burns.
Not available.
Wash thoroughly after handling. When using, do not eat, drink or smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
Rapid exothermic polymerization will occur in the presence of water, amines, alkalis and alcohols.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Store away from incompatible materials.
Water. Alcohols. Amines. Bases.
Oxides of carbon. None if used for intended purpose.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (Cyanoacrylate ester)
- Transport Class
- Combustible Liquid
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE 408 INSTANT ADHESIVE known as Loctite 408 20g EN/CH/JP?
The signal word is danger.
What is the physical form of LOCTITE 408 INSTANT ADHESIVE known as Loctite 408 20g EN/CH/JP?
LOCTITE 408 INSTANT ADHESIVE known as Loctite 408 20g EN/CH/JP is a liquid with colorless / colorless to light yellow color. It has odourless / odorless odor.
What is the solubility of LOCTITE 408 INSTANT ADHESIVE known as Loctite 408 20g EN/CH/JP?
Polymerises in presence of water. Water
What is LOCTITE 408 INSTANT ADHESIVE known as Loctite 408 20g EN/CH/JP used for?
Adhesive
What are the hazard statements for LOCTITE 408 INSTANT ADHESIVE known as Loctite 408 20g EN/CH/JP?
This substance has 3 hazard statements:
- H227: COMBUSTIBLE LIQUID
- H320: CAUSES EYE IRRITATION
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD
What is the melting point of LOCTITE 408 INSTANT ADHESIVE known as Loctite 408 20g EN/CH/JP?
The melting point is Not applicable, Product is a liquid and the boiling point is > 149 °C (> 300.2 °F) None.