Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-AD DEOXDZR7-17 AERO
- Synonyms
- TURCO DEOXIDIZER DE7-17 TONER
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Auxiliary product
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tripotassium hexacyanoferrate | 13746-66-2 | 10 - 30% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes. If symptoms develop and persist, get medical attention.
Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE C-AD 4215-LT AERO
---
BONDERITE C-IC DEOXDZR 6MU ACID DEOXIDIZER AERO
---
BONDERITE C-IC DEOXDZR 6MU AERO ACID DEOXIDIZER
---
BONDERITE C-MC 5884 AERO
---
BONDERITE C-IC 2310 AERO
---
BONDERITE S-AD ALKETCH L AERO
---
BONDERITE C-MC 6783-50 AERO
---
BONDERITE C-AK 4181-L AERO
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. For industrial use only. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation should effectively remove and prevent buildup of any vapor/mist/fume/dust generated from the handling of this product.
Wear impervious gloves for prolonged contact.
Safety goggles or safety glasses with side shields.
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Avoid strong mineral acids, and oxidizers which may cause formation of hydrocyanic gas. Avoid sodium nitrite, ammonia, and chromium trioxide.
When heated to decomposition or on contact with strong acids potassium ferric cyanide may emit fumes of cyanide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE C-AD DEOXDZR7-17 AERO known by?
BONDERITE C-AD DEOXDZR7-17 AERO is also known as: TURCO DEOXIDIZER DE7-17 TONER
What is the hazard signal word for BONDERITE C-AD DEOXDZR7-17 AERO?
The signal word is danger.
What is the physical form of BONDERITE C-AD DEOXDZR7-17 AERO?
BONDERITE C-AD DEOXDZR7-17 AERO is a liquid with orange color.
What is the solubility of BONDERITE C-AD DEOXDZR7-17 AERO?
Complete
What is BONDERITE C-AD DEOXDZR7-17 AERO used for?
Auxiliary product
What are the hazard statements for BONDERITE C-AD DEOXDZR7-17 AERO?
This substance has 1 hazard statement:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE C-AD DEOXDZR7-17 AERO?
The melting point is 25 °F (-3.9 °C) and the boiling point is Not applicable.