NextSDS Logo
Safety Data Sheet EN

BONDERITE C-AK 4181-L AERO

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-AK 4181-L AERO
Product Code
790307
Synonyms
TURCO 4181 L

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1
Skin Corr. Cat. 1B
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P234 Keep only in original packaging.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium hydroxide 1310-73-2 10 - 30% Yes
Diethanolamine 111-42-2 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

For skin contact flush with large amounts of water. Obtain medical attention if irritation persists.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Get immediate medical attention for ingestion. Seek immediate medical attention for eye contact.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a moderate fire hazard.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Dike the spilled material, where this is possible. Ventilate area. Do not allow product to enter sewer or waterways.

Cleanup methods

Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container.

Materials: inert absorbent such as sand or vermiculite

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Provide adequate ventilation. Avoid breathing vapors or mists of this product. Wash thoroughly after handling.

Storage

Keep the container tightly closed and in a cool, well-ventilated place. Protect from freezing.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Solubility In Water
---
Flammability
Not applicable
State Under Standard Conditions
---
Relative Density
1.30 - 1.32 at 25 °C (77°F)
Solidification Point
---
Dynamic Viscosity
Not available.
Voc Content
6.5 % (calculated)
Explosive Limits
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable
Lower Explosive Limit
Not available.
Partition Coefficient
Not determined
Solubility
Complete
Vapor Pressure
Not determined
Bulk Density
---
Cloud Point
---
Upper Explosive Limit
Not available.
Molecular Weight
---
Kinematic Viscosity
Not available.
Appearance
---
Odor
Mild
Physical State
Liquid
Freezing Point
---
Melting Point
Not determined
Colour Intensity
---
Colour
Light yellow
Boiling Point
> 212 °F (> 100°C)
Solubility In Fat
---
Density
---
Decomposition Temperature
Not available.
Vapor Density
---
Form
---
Flash Point
Aqueous. Does not flash.
Auto Ignition Temperature
Not determined
Softening Point
---
Metal Corrosion
---
Odor Threshold
Not available.
Physical State Data
liquid
Ph
> 12.0
Crystallisation Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

This product reacts with acids.

Hazardous reactions

Will not occur.

Avoid

Avoid contact with acids.

Incompatible

Nitrites may react with organic amines to form nitrosamines which can cause cancer. Reaction with strong acids.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1824
Shipping Name
Sodium hydroxide solution
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE C-AK 4181-L AERO known by?

BONDERITE C-AK 4181-L AERO is also known as: TURCO 4181 L

What is the hazard signal word for BONDERITE C-AK 4181-L AERO?

The signal word is danger.

What is the physical form of BONDERITE C-AK 4181-L AERO?

BONDERITE C-AK 4181-L AERO is a liquid with light yellow color. It has mild odor.

What is the solubility of BONDERITE C-AK 4181-L AERO?

Complete

What is BONDERITE C-AK 4181-L AERO used for?

Cleaner

What are the hazard statements for BONDERITE C-AK 4181-L AERO?

This substance has 2 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE C-AK 4181-L AERO?

The melting point is Not determined and the boiling point is > 212 °F (> 100°C).