NextSDS Logo
Safety Data Sheet EN

BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT
Product Code
592626
Synonyms
PARCOLENE AT

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Conversion coating

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608 (toll free)

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300 (toll free)

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H319 CAUSES SERIOUS EYE IRRITATION.

Precautionary Statements

P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Pentasodium triphosphate 7758-29-4 10 - 30% No
Trisodium orthophosphate 7601-54-9 1 - 5% No
Tetrasodium pyrophosphate 7722-88-5 1 - 5% No
Titanium dioxide 13463-67-7 1 - 5% No

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air.

Skin contact

Immediately wash skin thoroughly with soap and water.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.

Ingestion

Do not induce vomiting.

Immediate Medical Attention

If symptoms develop and persist, get medical attention. Seek immediate medical attention for eye contact. Get immediate medical attention for ingestion.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Sweep up or gather material and place in appropriate container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing dust. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep the container tightly closed and in a cool, well-ventilated place.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State Data
solid
Evaporation Rate
Not applicable
Flash Point
Not applicable
Form
---
Decomposition Temperature
Not available.
Softening Point
---
Cloud Point
---
Voc Content
Not applicable
Relative Density
1.07
Auto Ignition Temperature
Not applicable
Colour Intensity
---
Bulk Density
---
Relative Evaporation Rate
---
Odor Threshold
Not available.
Lower Explosive Limit
Not applicable
Ph
9.1 (1% solution)
Solubility In Water
---
Density
---
Upper Explosive Limit
Not applicable
Freezing Point
---
Flammability
Not applicable
Properties Status
---
Kinematic Viscosity
Not available.
Appearance
---
Vapor Density
---
Molecular Weight
---
Partition Coefficient
Not determined
State Under Standard Conditions
---
Explosive Limits
---
Physical State
Solid
Boiling Point
Not applicable
Vapor Pressure
Not determined
Solubility
Appreciable
Dynamic Viscosity
Not available.
Crystallisation Point
---
Solubility In Fat
---
Colour
White
Melting Point
Not applicable
Odor
Odourless / Odorless
Solidification Point
---
Metal Corrosion
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids or oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
RQ, Environmentally hazardous substance, solid, n.o.s.
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT known by?

BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT is also known as: PARCOLENE AT

What is the hazard signal word for BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT?

The signal word is warning.

What is the physical form of BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT?

BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT is a solid with white color. It has odourless / odorless odor.

What is the solubility of BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT?

Appreciable

What is BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT used for?

Conversion coating

What are the hazard statements for BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT?

This substance has 2 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H319: CAUSES SERIOUS EYE IRRITATION.

What is the melting point of BONDERITE M-AC AT PHOSPHATE ACTIVATOR known as PARCOLENE AT?

The melting point is Not applicable and the boiling point is Not applicable.