Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CO2 Hop Extract
- Synonyms
- Pure Resin CO2 Hop Extract, Kettle Extract, Liquid CO2 Extract, Supercritical CO2 Extract, Pure Resin Extract, Standardized Extract
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Ingredient used in brewing beer.
Manufacturers & Suppliers
Yakima Chief-Hopunion, LLC
manufacturer
203 Division ST. Yakima, WA 98902 (USA)
800 952 4873
https://ychhops.com
Yakima Chief-Hopunion, LLC
manufacturer
555 West South Hill Road PO Box 209 Sunnyside, WA 98944 (USA)
(509) 839-9022
Yakima Chief-Hopunion, LLC
manufacturer
203 Division Street, Yakima, WA 98902
509 453 4792
Emergency Contacts
Yakima Chief-Hopunion, LLC
800 952 4873
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
A slightly acidic solid or resinous phase; concentrate of alpha acids, beta acids, oils and uncharacterized resins produced by CO2 extraction.
Notes
Not Applicable Product is natural, unrefined and contains no additives.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove affected person to fresh air. Administer oxygen if necessary.
Wash with warm, soapy water. Seek medical attention if irritation persists. Launder contaminated clothing before reuse.
Wash with copious amounts of water. Seek medical attention if irritation persists.
Not Applicable
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry Powder, Foam, Water, CO2
None Known
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Scoop/shovel spilled material into recovery container. Flush area with hot soapy water to remove final traces.
Scoop/shovel spilled material into recovery container.
Related Products
Similar products with comparable safety profiles
CO₂ Hop Extract
---
Iso (Iso 10%, Iso 30%, Aqueous Iso, Potassium Salts of iso-alpha-acids) Made from CO2 Hop Extract
---
Malt Extract
CAS: 8002-48-0
HVG-Hops Pellets
---
Malt extract
CAS: 8002-48-0
Carbon dioxide
CAS: 124-38-9
Carbon dioxide
CAS: 124-38-9
Carbon dioxide
CAS: 124-38-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged skin contact. Use personal protective equipment (Section 8)
Store at room temperature or at a temperature range of -3°C to 5°C (25°F to 41°F).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation
wear rubber gloves if prolonged exposure
wear safety glasses
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Product is stable under appropriate storage conditions, in closed containers and/or under inert atmosphere. (Section 7.3)
Product is sensitive to oxidation in open containers, in absence of inert atmosphere and/or under excessive temperatures
None known
See Section 7.3
None Known
None Known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- CO2 Hop Extract
Product should be stored away from engines or any heat source during transportation.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is CO2 Hop Extract known by?
CO2 Hop Extract is also known as: Pure Resin CO2 Hop Extract, Kettle Extract, Liquid CO2 Extract, Supercritical CO2 Extract, Pure Resin Extract, Standardized Extract
What is the hazard signal word for CO2 Hop Extract?
The signal word is no signal word.
What is the physical form of CO2 Hop Extract?
CO2 Hop Extract is a solid appearing as yellow, green or brown resin concentrate with a pungent odor. with yellow, green or brown color. It has typical hoppy, depends on variety odor.
What is CO2 Hop Extract used for?
Ingredient used in brewing beer.
What is the melting point of CO2 Hop Extract?
The melting point is 40 – 60° (104 – 140°F), depending on variety and the boiling point is > 100°C.