Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Iso (Iso 10%, Iso 30%, Aqueous Iso, Potassium Salts of iso-alpha-acids) Made from CO2 Hop Extract
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Ingredient used in brewing beer.
Manufacturers & Suppliers
Yakima Chief Hops, Inc.
manufacturer
306 Division St. Yakima, WA 98902 (USA)
1.509.453.4792
https://Yakimachief.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
An aqueous solution of the potassium salts of the iso-alpha-acids produced by isomerizing the alpha-acids in CO2 extract.
Notes
Not Applicable Product is natural.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove affected person to fresh air. Administer oxygen if necessary.
Wash with warm, soapy water. Seek medical attention if irritation persists. Launder contaminated clothing before reuse.
Wash with copious amounts of water. Seek medical attention if irritation persists.
Not Applicable
Immediate Medical Attention
Seek medical attention if irritation persists.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry Powder, Foam, Water, CO2
None Known
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Scoop/shovel spilled material into recovery container. Flush area with hot soapy water to remove final traces.
Scoop/shovel spilled material into recovery container. Flush area with hot soapy water to remove final traces.
Related Products
Similar products with comparable safety profiles
CO2 Hop Extract
---
CO₂ Hop Extract
---
Tetra (Tetra 10%, Aqueous Tetra, Potassium Salts of tetrahydroiso-alpha-acids)
---
Isopropyl alcohol, 70% in water
---
Isopropyl alcohol, 70% in water
---
ISOPROPYL ALCOHOL 99%
CAS: 67-63-0
Isopropyl alcohol
CAS: 67-63-0
Isopropyl alcohol
CAS: 67-63-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged skin contact. Use personal protective equipment (Section 8)
Store in unopened container at 59°F to 77°F (15°C to 25°C)
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation
wear rubber gloves if prolonged exposure
wear safety glasses
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Product is stable under appropriate storage conditions, in closed containers and/or under inert atmosphere. (Section 7.3)
Product is sensitive to oxidation in open containers, and/or under excessive temperatures
None known
See Section 7.3
None Known
None Known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Iso
should not be transported along with ADR classified Cargo. Product should be stored away from engines or any heat source during transportation.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Iso (Iso 10%, Iso 30%, Aqueous Iso, Potassium Salts of iso-alpha-acids) Made from CO2 Hop Extract?
The signal word is no signal word.
What is the physical form of Iso (Iso 10%, Iso 30%, Aqueous Iso, Potassium Salts of iso-alpha-acids) Made from CO2 Hop Extract?
Iso (Iso 10%, Iso 30%, Aqueous Iso, Potassium Salts of iso-alpha-acids) Made from CO2 Hop Extract is a liquid appearing as pale yellow liquid w/ slight resinous odor. with pale yellow color. It has slight resinous odor. odor.
What is Iso (Iso 10%, Iso 30%, Aqueous Iso, Potassium Salts of iso-alpha-acids) Made from CO2 Hop Extract used for?
Ingredient used in brewing beer.