Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tetra (Tetra 10%, Aqueous Tetra, Potassium Salts of tetrahydroiso-alpha-acids)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Ingredient used in brewing beer.
Manufacturers & Suppliers
Yakima Chief Hops, Inc.
manufacturer
306 Division St. Yakima, WA 98902 (USA)
1.509.453.4792
Yakimachief.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
An aqueous solution the potassium salts of the tetrahydroiso-alpha-acids produced by isomerizing and hydrogenating the alpha-acids from CO2 hop extract.
Notes
Not Applicable Product is natural.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove affected person to fresh air. Administer oxygen if necessary.
Wash with warm, soapy water. Launder contaminated clothing before reuse.
Wash with copious amounts of water.
Not Applicable
Immediate Medical Attention
Seek medical attention if irritation persists.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry Powder, Foam, Water, CO2
None Known
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Scoop/shovel spilled material into recovery container. Flush area with hot soapy water to remove final traces.
Scoop/shovel spilled material into recovery container. Flush area with hot soapy water to remove final traces.
Related Products
Similar products with comparable safety profiles
Iso (Iso 10%, Iso 30%, Aqueous Iso, Potassium Salts of iso-alpha-acids) Made from CO2 Hop Extract
---
BAPTA tetrapotassium salt
CAS: 73630-08-7
Tetracontane
CAS: 4181-95-7
Tetramethylammonium hydroxide, 25% w/w aqueous solution, Electronic Grade
---
tetra-Sodium diphosphate decahydrate
CAS: 13472-36-1
Ethylenediaminetetraacetic acid dipotassium salt dihydrate
CAS: 25102-12-9
Potassium sodium tartrate tetrahydrate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 6381-59-5
Titriplex® III for analysis (ethylenedinitrilotetraacetic acid, disodium salt dihydrate) ACS, ISO, Reag. Ph Eur
CAS: 6381-92-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged skin contact. Use personal protective equipment (Section 8)
Store in unopened container at 59°F to 77°F (15°C to 25°C)
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation
wear rubber gloves if prolonged exposure
wear safety glasses
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Product is stable under appropriate storage conditions, in closed containers and/or under inert atmosphere. (Section 7.3)
Product is sensitive to oxidation in open containers, and/or under excessive temperatures
None known
See Section 7.3
None Known
None Known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Tetra
Product is not classified as ADR and should not be transported along with ADR classified Cargo. Product should be stored away from engines or any heat source during transportation.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tetra (Tetra 10%, Aqueous Tetra, Potassium Salts of tetrahydroiso-alpha-acids)?
The signal word is no signal word.
What is the physical form of Tetra (Tetra 10%, Aqueous Tetra, Potassium Salts of tetrahydroiso-alpha-acids)?
Tetra (Tetra 10%, Aqueous Tetra, Potassium Salts of tetrahydroiso-alpha-acids) is a liquid appearing as amber brown resin w/ slight resinous odor. . It has slight resinous odor. odor.
What is Tetra (Tetra 10%, Aqueous Tetra, Potassium Salts of tetrahydroiso-alpha-acids) used for?
Ingredient used in brewing beer.