Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- F04/05 Black / F08 Black
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Electrical/Electronic Encapsulant, Sealant, Adhesive
Manufacturers & Suppliers
Multi-Seals, Inc.
manufacturer
540 North Main St., Manchester, CT 06042 - USA
860-643-7188
Emergency Contacts
Emergency Contact
860-643-7188
8:30am - 5:00pm EST
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Not applicable
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Bisphenol A diglycidyl ether - bisphenol A copolymer | 25036-25-3 | 20 - 50% | No |
| Formaldehyde, polymer with (chloromethyl)oxirane and 2-methylphenol | 29690-82-2 | 10 - 20% | No |
| Benzenamine, 4,4'-sulfonylbis- | 80-08-0 | 5 - 7% | No |
Form: QC-098 Rev. C 5/29/18 Page 1/5 Flexible Adhesive Systems Safety Data Sheet according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012
Notes
¹ Only present in F04/05 Black
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell.
Symptoms: Not a normal route of exposure. May cause respiratory tract irritation.
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Call a physician if irritation develops and persists. In case of contact with hot or molten product, get immediate medical advice/attention.
Symptoms: May cause skin irritation. Symptoms may include redness, drying, defatting and cracking of the skin. May cause an allergic skin reaction.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lenses, if worn. If irritation persists, get medical attention. In case of contact with hot or molten product, get immediate medical advice/attention.
Symptoms: Causes serious eye irritation. Symptoms may include discomfort or pain, excess blinking and tear production, with marked redness and swelling of the conjunctiva.
If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical advice/attention if you feel unwell.
Symptoms: Not a normal route of exposure. May result in obstruction and temporary irritation of the digestive tract.
Immediate Medical Attention
Get medical advice/attention if you feel unwell. In case of contact with hot or molten product, get immediate medical advice/attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Powder, water spray, foam, carbon dioxide.
None known.
Fire hazard : Products of combustion may include, and are not limited to: oxides of carbon, oxides of nitrogen.
Keep upwind of fire.
Firefighter Protection
Wear full fire fighting turn-out gear (full Bunker gear) and respiratory protection (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8. Keep unnecessary personnel away from the release.
Vacuum or sweep material and place in a disposal container.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not swallow. Handle and open container with care. When using do not eat, drink or smoke.
F04/F08 Black: Keep out of the reach of children. Store below 39°F (4°C) in a dry area. Keep container tightly closed. F05 Black: Keep out of the reach of children. Store below 80°F (27°C) in a dry area. Keep container tightly closed.
Wash hands before eating, drinking, or smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure limits.
Wear chemically resistant protective gloves.
Wear eye protection.
None necessary under normal conditions of use.
Wear suitable protective clothing.
Maintain levels below Community environmental protection thresholds.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
Heat. Incompatible materials. Moisture.
Acids. Bases. Strong oxidizing agents.
May include, and are not limited to: oxides of carbon, oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for F04/05 Black / F08 Black?
The signal word is warning.
What is the physical form of F04/05 Black / F08 Black?
F04/05 Black / F08 Black is a solid appearing as film with black color. It has no data available odor.
What is the solubility of F04/05 Black / F08 Black?
No data available
What is F04/05 Black / F08 Black used for?
Electrical/Electronic Encapsulant, Sealant, Adhesive
What are the hazard statements for F04/05 Black / F08 Black?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
What is the melting point of F04/05 Black / F08 Black?
The melting point is No data available and the boiling point is No data available.