Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- K05
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Special grease for power and manual chucks
Manufacturers & Suppliers
Dow Corning
manufacturer
SMW-AUTOBLOK Spannsysteme GmbH
Wiesentalstrasse 28, D-88074 Meckenbeuren
http://www.smw-autoblok.de
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Inorganic and organic compounds in mineral oil.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calciumdihydroxid EC: 215-137-3 | 1305-62-0 | 36% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
No first aid should be needed.
Wipe off and wash with soap and water.
Flush with water.
No first aid should be needed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, foam, dry powder or fine water spray. Water can be used to cool fire exposed containers.
None known.
None known.
Keep containers cool with water spray until well after the fire is out.
Firefighter Protection
A self-contained respirator and protective clothing should be worn.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow large quantities to enter drains or surface waters.
Scrape up and place in a container fitted with a lid.
Materials: container fitted with a lid
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin and eye contact.
Keep container closed and store away from water or moisture.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation : Refer to Section 7.
Chemical protective gloves should be worn where repeated or prolonged contact can occur:
Safety glasses should be worn.
Suitable respiratory protection should be worn if the product is used in large quantities, confined spaces or in other circumstances where the OEL may be approached or exceeded.
Protective equipment is not normally necessary.
Refer to section 6 and 12.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal usage conditions.
None established.
Can react with strong oxidising agents.
See section 5. Hazardous combustion products
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling according to EEC Directive
S-phrases: S24/25 Avoid contact with skin and eyes. S51 Use only in well-ventilated areas. This information is based on product test data.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for K05?
The signal word is no signal word.
What is the physical form of K05?
K05 is a paste appearing as form: paste, colour: white with white color.
What is K05 used for?
Special grease for power and manual chucks