Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ceramic bodies
- Synonyms
- Ceramic compound, Preparation, Kaolinitic clays, Plastic Clays, Ball Clays, Fine Clays, Steinzeug-Dreh- und Stanzmasse Nr. 11, weiß, unschamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 111, weiß, unschamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 11 M, weiß, unschamottiert; Steinzeug-Dreh- und Stanzmasse mit Spots Nr. 11 py-F, weiß, unschamottiert; Steinzeug-Dreh- und Stanzmasse mit Spots Nr. 11 py-G, weiß, unschamottiert
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Exempted in accordance with Annex V.7
Identified Uses
Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.), Enamels, Glass, Fillers, Deposit sealing, Paint, Plastic & Rubber, Adhesives and Sealant, Building material & Cement, Fertilisers & Agricultural products
Manufacturers & Suppliers
Arno Witgert, Inh. Dipl.-Ing. (FH) Michael Liebig e. K.
manufacturer
OT Wahnscheid, 56414 Herschbach, Germany
0049 (0)6435/9223-0
Emergency Contacts
Emergency Contact
0049 (0)6435/9223-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Kaolinitic clay. Amount: 100%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Kaolinitic clay EC: 310-127-6 | 999999-99-4 | 100% | No |
Notes
May contain mineral or chemical additives.
First Aid Measures
Emergency procedures for chemical exposure incidents
Movement of the exposed individual from the area to fresh air is recommended.
No special first aid measures necessary.
Rinse with copious quantities of water and seek medical attention if irritation persists.
No first-aid measure required.
Immediate Medical Attention
No specific actions are required.
Medical Treatment
No specific actions are required.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
No specific extinguishing media is needed.
Non combustible.
Firefighter Protection
No specific fire-fighting protection is required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid airborne dust generation, wear personal protective equipment in compliance with national legislation.
No special requirements.
Related Products
Similar products with comparable safety profiles
Ceramic bodies
---
Ceramic shapes manufactured from FUSED SILICA
---
White Pottery Clay Body-Moist
---
NOVALUBE CERAMIC
---
Keramab® Ceramic fibre textile products
CAS: 142844-00-6
Keramab® Ceramic fibre textile products
CAS: 142844-00-6
Ceramill Model 2.0
---
CERAMIC SPRAY, ABI-SHIELD CERAMIC PROTECTIVE SPRAY
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid airborne dust generation. In case of insufficient ventilation, wear suitable respiratory protective equipment. Handle packaged products carefully to prevent accidental bursting.
Keep containers closed and store packaged products so as to prevent accidental bursting.
Do not to eat, drink and smoke in work areas; wash hands after use; remove contaminated clothing and protective equipment before entering eating areas.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Minimise airborne dust generation. Use process enclosures, local exhaust ventilation or other engineering controls to keep airborne levels below specified exposure limits. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne particles below the exposure limit. Apply organisational measures, e.g. by isolating personnel from dusty areas.
Appropriate protection (e.g. gloves, barrier cream) is recommended for workers who suffer from dermatitis or sensitive skin.
Wear safety glasses with side-shields in circumstances where there is a risk of penetrative eye injuries.
In case of prolonged exposure to airborne dust concentrations, wear a respiratory protective equipment that complies with the requirements of European or national legislation.
Appropriate protection (e.g. protective clothing, barrier cream) is recommended for workers who suffer from dermatitis or sensitive skin.
Avoid wind dispersal.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Chemically stable.
Inert, not reactive.
No hazardous reactions.
Not relevant
No particular incompatibility.
Not relevant
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Ceramic bodies known by?
Ceramic bodies is also known as: Ceramic compound, Preparation, Kaolinitic clays, Plastic Clays, Ball Clays, Fine Clays, Steinzeug-Dreh- und Stanzmasse Nr. 11, weiß, unschamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 111, weiß, unschamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 11 M, weiß, unschamottiert; Steinzeug-Dreh- und Stanzmasse mit Spots Nr. 11 py-F, weiß, unschamottiert; Steinzeug-Dreh- und Stanzmasse mit Spots Nr. 11 py-G, weiß, unschamottiert
What is the hazard signal word for Ceramic bodies?
The signal word is no signal word.
What is the physical form of Ceramic bodies?
Ceramic bodies is a solid appearing as solid (bulk, lumps, pellets, granulate or powder) with grey-white color. It has odourless odor.
What is the solubility of Ceramic bodies?
Solubility in hydrofluoric acid: Yes
What is Ceramic bodies used for?
Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.), Enamels, Glass, Fillers, Deposit sealing, Paint, Plastic & Rubber, Adhesives and Sealant, Building material & Cement, Fertilisers & Agricultural products
What is the melting point of Ceramic bodies?
The melting point is Not available .