Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Scarva TS FLAXpaperCLAY Ceramic Body
- Product Form
- plastic/liquid form
- Product Code
- ES 200/300/400/600/800/900
Regulatory Identifiers
- CAS Number
- N/A
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Component CAS Wt%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Low toxicity dust (eg. Felspathic major component and ceramic minerals, clays etc.) | --- | --- | No |
| Crystalline silica, quartz | 14808-60-7 | 50% | No |
Products include amounts of cellulose pulp and flax fibres
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove patient to fresh air, loosen tight clothing and seek medical attention.
Remove contaminated clothing. Wash with soap and water. Seek medical advice if any irritation persists.
Irrigate with clean water for 15 minutes and seek medical assistance.
Do not induce vomiting. Rinse mouth with water and give 200-300ml of water to drink (provided the patient is conscious).
Immediate Medical Attention
Seek medical assistance for eyes, seek medical advice if skin irritation persists, seek medical attention for inhalation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use of water, carbon dioxide, dry powder, sand and chemical foam extinguishers
The product is not combustible or explosive.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Small spillage may be washed to drains with plenty of water (provided effluent consent condition are complied with).
Place waste in suitable container prior to disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands/skin after use.
Store in sealed packaging (eg, as supplied) in normal, dry conditions to ensure loss of moisture is minimised.
Wash hands/skin after use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If necessary, local exhaust ventilation should be provided to minimise inhalation (dry powder products) to comply with occupational Exposure Limits (MEL’s, OES’s) – Refer to latest edition of HSE Guidance note EH40
Gloves (if skin contact is persistent.
safety glasses or goggles (to BS 2092) recommended if contact with eyes otherwise possible.
HSE approved respiratory device for dust if engineering controls do not provide adequate protection.
Overalls (which do not retain dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The kiln should be well-ventilated, ie, suitable extraction fan or canopy fitted that allows the fumes to be safely removed from the kiln room.
During firing combustion of organic, cellulose pulp and flax fibres will create a smoke effect – avoid inhalation.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No specific data available.
12.2 Persistence and degradability
Products are essentially insoluble in water. Flax fibre/cellulose pulp is biodegradable.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in accordance with current waste Disposal regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Supply hazard classification HARMFUL Xn.
R-PHASES R20 harmful by inhalation. R48 – Danger of serious damage to health by prolonged exposure. S-PHASES S22/23 do not breathe dust or spray.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Scarva TS FLAXpaperCLAY Ceramic Body?
The signal word is no signal word.
What is the physical form of Scarva TS FLAXpaperCLAY Ceramic Body?
Scarva TS FLAXpaperCLAY Ceramic Body is a plastic solid (pugged sections)/liquid appearing as plastic solid (pugged sections)/liquid . It has odourless odor.
What are the hazard statements for Scarva TS FLAXpaperCLAY Ceramic Body?
This substance has 2 hazard statements:
- As supplied in the pugged form, the products do not present a significant health hazard.
- Product in the plastic form is not classified as dangerous for labelling purposes (UK regulations).
What is the melting point of Scarva TS FLAXpaperCLAY Ceramic Body?
The melting point is Greater than 1000°C .