MTN PRO Gesso primer

remove the person affected from the exposure area and provide with fresh air. Seek medical attention if the symptoms get worse or persist.

Symptoms: symptoms of intoxication

clean the affected area thoroughly with water and neutral soap. In case of modifications on the skin, seek medical advice with this Safety data Sheet

Symptoms: stinging, redness, rashes, blisters

Rinse eyes thoroughly with water for at least 15 minutes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, as this could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS of the product.

In case of consumption, seek immediate medical assistance showing the SDS of this product.

If possible use polyvalent powder fire extinguishers (ABC powder), alternatively use foam or carbon dioxide extinguishers (CO₂).

IT IS RECOMMENDED NOT to use full jet water as an extinguishing agent.

As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk.

Only properly trained personnel should be involved in firefighting. Destroy any source of ignition. In case of fire, refrigerate the storage containers and tanks for products susceptible to inflammation.

Isolate leaks provided that there is no additional risk for the people performing this task. Evacuate the area and keep out those without protection.

This product is not classified as hazardous to the environment.

Absorb the spillage using sand or inert absorbent and move it to a safe place.

Materials: sand or inert absorbent

Comply with the current standards 29 CFR 1910 Occupational Safety and Health Standards. Keep containers hermetically sealed. Control spills and residues, destroying them with safe methods (section 6). Avoid leakages from the container. Maintain order and cleanliness where dangerous products are used.

Avoid sources of heat, radiation, static electricity and contact with food.

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Avoid the evaporation of the product as it contains flammable substances, which could form flammable vapour/air mixtures in the presence of sources of ignition. Control sources of ignition (mobile phones, sparks,...) and transfer at slow speeds to avoid the creation of electrostatic charges.

Protective gloves against minor risks. Replace gloves in case of any sign of damage. For prolonged periods of exposure to the product for professional /industrial users, we recommend using chemical protection gloves. Use gloves in accordance with manufacturer’s use limitations and OSHA standard 1910.138 (29CFR)

Panoramic glasses against splash/projections. Clean daily and disinfect periodically according to the manufacturer’s instructions. Use if there is a risk of splashing. Use this PPE in accordance with manufacturer’s use limitations and OSHA standard 1910.133 (29CFR)

Filter mask for particles. Replace when an increase in resistance to breathing is observed. Use respirator in accordance with manufacturer’s use limitations and OSHA standard 1910.134 (29CFR).

Antistatic and fireproof protective clothing. Limited protection against flames. Safety footwear with antistatic and heat resistant properties. Replace boots at any sign of deterioration. Use foot protection in accordance with manufacturer’s use limitations and OSHA standard 1910.136 (29CFR)

In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container.

stable under recommended storage conditions

No hazardous reactions are expected because the product is stable under recommended storage conditions.

No hazardous reactions are expected

Increase in temperature: Risk of combustion; Sunlight: Avoid direct impact; Shock and friction: Not applicable; Contact with air: Not applicable; Humidity: Not applicable

Acids: Avoid strong acids; Oxidising materials: Avoid direct impact; Others: Avoid alkalis or strong bases

Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO2), carbon monoxide and other organic compounds.

Special regulations: 63, 959, 190, 277, 327, 344; Limited quantities: 1 L; Segregation group: Non-applicable