Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3M Unitek Transbond XT Primer
- Product Code
- 712-034, 70-2020-8946-5, 7000004380
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Orthodontic use
Manufacturers & Suppliers
3M
manufacturer
3M Center, St. Paul, MN 55144-1000, USA
1-888-3M HELPS (1-888-364-3577)
Emergency Contacts
Emergency Contact
1-800-364-3577
24 hours
Emergency Contact
(651) 737-6501
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If you feel unwell, get medical attention.
Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention.
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention.
Rinse mouth. If you feel unwell, get medical attention.
Immediate Medical Attention
Not applicable
Medical Treatment
Not applicable
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.
None inherent in this product.
Firefighter Protection
Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.
For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.
Avoid release to the environment.
Collect as much of the spilled material as possible. Clean up residue with an appropriate solvent selected by a qualified and authorized person.
Materials: appropriate solvent
Related Products
Similar products with comparable safety profiles
3M Unitek Transbond XT Primer
---
3M™ Polyether Adhesive - New Formulation
---
HIGH BUILD ETCH PRIMER
---
3M™ Super 77™ Multipurpose Adhesive
---
2102 Hard Hat Adhesion Primer
UFI: HRH1-J09R-Q00J-M32Q
TECHNOMELT PUR PRIMER 6B-23
UFI: SF6K-AWX7-M20Q-K32Y
UV2015 - UV Flexo Matt Primer For Difficult Substrates
---
2C-EP Primer, quick curing
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
A no-touch technique is recommended. If skin contact occurs, wash skin with soap and water. Acrylates may penetrate commonly-used gloves. If product contacts glove, remove and discard glove, wash hands immediately with soap and water and then re-glove. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wash contaminated clothing before reuse. Do not get in eyes.
No special storage requirements.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use in a well-ventilated area.
See Section 7.1 for additional information on skin protection.
Safety Glasses with side shields
None required.
See Section 7.1 for additional information on skin protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
Hazardous polymerization will not occur.
Light
None known.
None known. Refer to section 5.2 for hazardous decomposition products during combustion.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste product in a permitted industrial waste facility.
Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contact 3M for more information.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3M Unitek Transbond XT Primer?
The signal word is warning.
What is the physical form of 3M Unitek Transbond XT Primer?
3M Unitek Transbond XT Primer is a liquid appearing as transparent yellow with transparent yellow color. It has slight acrylate odor.
What is 3M Unitek Transbond XT Primer used for?
Orthodontic use
What are the hazard statements for 3M Unitek Transbond XT Primer?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H320: Causes eye irritation.
What is the melting point of 3M Unitek Transbond XT Primer?
The melting point is Not Applicable and the boiling point is Not Applicable.