Ammonia solution 32% EMPLURA®

fresh air. Call in physician.

Symptoms: bronchitis, Cough, Shortness of breath, Lung oedema

Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.

Symptoms: Irritation and corrosion

rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

Symptoms: Risk of blindness!

make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately.

Symptoms: gastric pain, Bloody vomiting, Nausea

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Ammonia solution itself is not flammable, but can form an ignitable ammonia/air-mixture by outgassing. Ambient fire may liberate hazardous vapours.

Cool closed containers exposed to fire with water spray. Suppress (knock down) gases/vapours/mists with a water spray jet.

Do not breathe vapours, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not empty into drains.

Take up with liquid-absorbent and neutralising material (e.g. Chemizorb® OH⁻, Merck Art. No. 101596).

Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® OH⁻, Merck Art. No. 101596)

Observe label precautions.

Tightly closed. Recommended storage temperature see product label.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

full contact: - Glove material: butyl-rubber - Glove thickness: 0,7 mm - Break through time: > 480 min splash contact: - Glove material: Nitrile rubber - Glove thickness: 0,40 mm - Break through time: > 240 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 898 Butoject® (full contact), KCL 730 Camatril® -Velours (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet <(>, <)> supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

required when vapours/aerosols are generated. Recommended Filter type: Filter K (acc. to DIN 3181) for NH₃ The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not empty into drains.

Ammonia solution itself is not flammable, but can form an ignitable ammonia/air-mixture by outgassing.

See section 10.3

A risk of explosion and/or of toxic gas formation exists with the following substances: Oxidizing agents, Mercury, Oxygen, silver compounds, nitrogen trichloride, hydrogen peroxide, silver, antimony hydride, halogens, Acids, Calcium, Chlorine, Chlorites, auric salts, perchlorates, sodium hypochlorite, mercury compounds, halogen oxides, Heavy metals, Heavy metal salts, Acid chlorides, Acid anhydrides. Risk of ignition or formation of inflammable gases or vapours with: Boranes, Boron, Oxides of phosphorus, Nitric acid, silicon compounds, chromium(VI) oxide, chromyl chloride. Exothermic reaction with: Acetaldehyde, Acrolein, Barium, boron compounds, Bromine, halogen-halogen compounds, hydrogen bromide, silane, Hydrogen chloride gas, halogen compounds, dimethylsulfate, nitrogen oxides, Fluorine, Hydrogen fluoride, chlorates, carbon dioxide. Ethylene oxide, polymerisable.

Heating.

Aluminium, Lead, Nickel, silver, Zinc, Copper, metal alloys, various metals

in the event of fire: See section 5.

yes