Ammonia solution 25 % Suprapur®

After inhalation: fresh air. Call in physician.

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Ammonia solution itself is not flammable, but can form an ignitable ammonia/air-mixture by outgassing. Ambient fire may liberate hazardous vapours.

Cool closed containers exposed to fire with water spray. Suppress (knock down) gases/vapors/mists with a water spray jet.

Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not empty into drains.

Take up with liquid-absorbent and neutralising material (e.g. Chemizorb® OH⁻, Merck Art. No. 101596). Dispose of properly. Clean up affected area.

Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® OH⁻, Merck Art. No. 101596)

Observe label precautions.

No metal or light-weight-metal containers. Tightly closed. Recommended storage temperature see product label.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Full contact: Material: butyl-rubber, Minimum layer thickness: 0,7 mm, Break through time: 480 min, Material tested: Butoject® (KCL 898). Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,40 mm, Break through time: 240 min, Material tested: Camatril® (KCL 730 / Aldrich Z677442, Size M). This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

Recommended Filter type: Filter type K. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not empty into drains.

Ammonia solution itself is not flammable, but can form an ignitable ammonia/air-mixture by outgassing.

No data available

A risk of explosion and/or of toxic gas formation exists with the following substances: Oxidizing agents, Mercury, Oxygen, silver compounds, nitrogen trichloride, hydrogen peroxide, silver, antimony hydride, Halogens, Acids, Calcium, Chlorine, Chlorites, auric salts, perchlorates, sodium hypochlorite, mercury compounds, halogen oxides, Heavy metals, Heavy metal salts, Acid chlorides, Acid anhydrides. Risk of ignition or formation of inflammable gases or vapours with: Boranes, Boron, Oxides of phosphorus, Nitric acid, silicon compounds, chromium(VI) oxide, chromyl chloride. Exothermic reaction with: Acetaldehyde, Acrolein, Barium, boron compounds, Bromine, halogen-halogen compounds, hydrogen bromide, silane, Hydrogen chloride gas, halogen compounds, dimethylsulfate, nitrogen oxides, Fluorine, Hydrogen fluoride, chlorates, carbon dioxide, Ethylene oxide. Polymerisable.

Heating.

Aluminum, Lead, Nickel, silver, Zinc, Copper, metal alloys, various metals

In the event of fire: see section 5

See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.

See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.