Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TMB Peroxidase Substrate
- Product Code
- 50-76-25, 50-76-09, 50-76-08, 50-76-02, 50-76-01, 37-00-78
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagent
Manufacturers & Suppliers
KPL, Inc.
manufacturer
910 Clopper Road, Gaithersburg, Maryland 20878, USA
1-301-948-7755
http://www.kpl.com
Emergency Contacts
AUSTRALIA – POISONS INFORMATION CENTER
13 11 26
24 hours
CANADIAN TRANSPORT EMERGENCY CENTER
(1) 613 996 6666
24 hours/day, 7 days/week
UK – THE NATIONAL FOCUS
(44) 029 2041 6388
09:00-17:00 GMT
USA – NATIONAL RESPONSE CENTER
(1) 800 424 8802
24 hours/day, 7 days/week
CHEMTREC
1-800-424-9300
Day or Night
CHEMTREC
+1 703-527-3887
Day or Night
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N.N.-Dimethylformamide | 68-12-2 | 26% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air, rest. Refer for medical attention.
Remove contaminated clothes. Rinse and then wash skin with water and soap. Refer for medical attention.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
Immediate Medical Attention
Refer for medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Powder, alcohol-resistant foam, water spray, carbon dioxide.
Flammable. Gives off irritating or toxic fumes (or gases) in a fire. Above 58°C explosive vapour/air mixtures may be formed.
In case of fire: keep drums, etc., cool by spraying with water.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin, eyes and clothing.
Data for 100% Dimethylformamide:- Environmental effects from the substance have been investigated but none have been found.
Contain spill and then clean-up with copious amounts of water.
Materials: copious amounts of water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Take care to maintain clean working place. The substance must not be present at workplaces in quantities above that required for work to be progressed. Do not leave container open. Use leak-proof equipment with exhaust for refilling or transfer. Do not transport with/using compressed air. Avoid splashing. Fill only into labelled container. Use solvent resistant utensils. Avoid any contact when handling the substance. Prevent seepage into flooring (use of a steel tub). Use an appropriate exterior vessel when transporting in fragile containers.
Store at 2 - 8°C. Separated from strong oxidants, halogens.
Handle in accordance with good industrial hygiene and safety practice. Take care to maintain clean working place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not Available
Protective gloves.
Safety goggles or eye protection in combination with breathing protection.
Ventilation, local exhaust, or breathing protection.
Protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Reacts violently withoutaints, nitrates and halogenated hydrocarbons. Attacks some plastic and rubber.
Will not occur
heating or on burning
Oxidants, nitrates and halogenated hydrocarbons, Acid Chlorides, Chloroformates, some plastic and rubber
Carbon Monoxide, Carbon Dioxide, Nitrogen Oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2265
- Shipping Name
- N,N-Dimethylformamide
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TMB Peroxidase Substrate?
The signal word is danger.
What is the physical form of TMB Peroxidase Substrate?
TMB Peroxidase Substrate is a liquid appearing as clear to slightly bluish colored solution. .
What is TMB Peroxidase Substrate used for?
Reagent
What are the hazard statements for TMB Peroxidase Substrate?
This substance has 4 hazard statements:
- H312: Harmful in contact with skin
- H319: Causes serious eye irritation
- H332: Harmful if inhaled
- H360D: May damage the unborn child.
What is the melting point of TMB Peroxidase Substrate?
The melting point is -61°C and the boiling point is 153°C.