ISH Peroxidase Inhibitor

Move to fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

If skin irritation persists, call a physician. If on skin, rinse well with water. If on clothes, remove clothes.

In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.

Clean mouth with water and drink afterwards plenty of water. Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital. Rinse mouth with water.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

High volume water jet

Do not allow run-off from fire fighting to enter drains or water courses.

Use personal protective equipment. Refer to protective measures listed in sections 7 and 8.

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. Local authorities should be advised if significant spillages cannot be contained.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Do not breathe vapours/dust. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.

Keep container tightly closed in a dry and well-ventilated place. See label, package insert or internal guidelines.

When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.

Normal measures for preventive fire protection.

No data available

In case of contact through splashing: Material: Nitrile rubber, Break through time: > 30 min, Glove thickness: > 0,11 mm. In case of full contact: Material: butyl-rubber, Break through time: > 480 min, Glove thickness: > 0,4 mm. Remarks: The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Eye wash bottle with pure water, Tightly fitting safety goggles, Wear face-shield and protective suit for abnormal processing problems.

Impervious clothing, Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Stable under normal conditions.

No data available

Reacts with the following substances: Acids, Bases, Oxidizing agents, Reducing agents, Metals, Explosive when dry. No decomposition if stored and applied as directed.

No data available

No data available

No decomposition if stored and applied as directed. In case of fire hazardous decomposition products may be produced such as: Oxygen

Send to a licensed waste management company. Can be disposed as waste water, when in compliance with local regulations.

Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company.