Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- INTERFINE 691 RAL1023 TRAFF.YELLOW PTA
- Product Code
- GFB132
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cosmetic finish coat
Manufacturers & Suppliers
International Paint (Korea) Limited
manufacturer
(8-6B/L Chilseo Industrial Complex), 626-6 Gyenae-Ri, Chilseo-Myeon, Haman-Gun, Gyeongsangnam-Do, Korea
055-632-6286(R&D), 055 586 2310(Fact)
Emergency Contacts
Factory
055-586-2310
Factory
055-586-2310
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Iso-butyl alcohol | 0000078-83-1 | 1 - 2.5% | Yes |
| Xylene | 0001330-20-7 | 10 - 20% | Yes |
| 3-Methoxybutyl acetate | 0004435-53-4 | 5 - 10% | Yes |
| Butyl acetate | 0000123-86-4 | 5 - 10% | Yes |
| Ethyl Benzene | 0000100-41-4 | 2.5 - 5% | Yes |
| Solvent naphtha (petroleum), light aromatic | 0064742-95-6 | 2.5 - 5% | Yes |
| N-butyl acrylate | 0000141-32-2 | 1% | Yes |
| Trade secret | --- | 50 - 60% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air, keep patient warm and at rest. If breathing is irregular or stopped, give artificial respiration. If unconscious place in the recovery position and obtain immediate medical attention. Give nothing by mouth.
Remove contaminated clothing. Wash skin thoroughly with soap and water or use a recognised skin cleanser. Do NOT use solvents or thinners.
Irrigate copiously with clean fresh water for at least 10 minutes, holding the eyelids apart and seek medical attention.
If accidentally swallowed obtain immediate medical attention. Keep at rest. Do NOT induce vomiting.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical attention. If unconscious place in the recovery position and obtain immediate medical attention. If accidentally swallowed obtain immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, CO2, powder, water spray
water jet
Fire will produce dense black smoke. Decomposition products may be hazardous to health.
Cool closed containers exposed to fire by spraying them with water.
Firefighter Protection
Avoid exposure and use breathing apparatus as appropriate.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove sources of ignition, do not turn lights or unprotected electrical equipment on or off. In case of a major spill or spillage in a confined space evacuate the area and check that solvent vapour levels are below the Lower Explosive Limit before re-entering.
Do not allow spills to enter drains or watercourses.
Clean, preferably with a detergent. Do not use solvents.
Materials: detergent
Related Products
Similar products with comparable safety profiles
Interthane 990 RAL1023 Traff.Yellow PtA
---
Interthane 990 RAL1023 Traff.Yellow PtA
---
Interthane 990 RAL1023 Traff.Yellow PtA
---
INTERTHANE 990 RAL6018 YELLOW GREEN PTA
---
INTERTHANE 990 RAL3001 SIGNAL RED PTA
---
INTERTHANE 990 RAL9016 TRAFFIC WHITE PA
---
INTERTHANE 990 RAL5010 GENTIAN BLUE PtA
---
Interthane 990 RAL1003 SignalYellow PtA
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle containers carefully to prevent damage and spillage. Naked flames and smoking should not be permitted in storage areas.
Handle containers carefully to prevent damage and spillage. Naked flames and smoking should not be permitted in storage areas.
Smoking, eating and drinking should be prohibited in all preparation and application areas.
Naked flames and smoking should not be permitted in storage areas. It is recommended that fork lift trucks and electrical equipment are protected to the appropriate standard.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction.
Gloves of an appropriate material should be worn during mixing and application.
Wear safety eyewear, e.g. safety spectacles, goggles or visors to protect against the splash of liquids. Eyewear should comply with an approved standard. Wear a full face shield if mixing or pouring operations pose a risk of splashes.
If these are not sufficient to maintain concentrations of particulates and any vapour below occupational exposure limits suitable respiratory protection must be worn. When concentrations exceed the exposure limits shown above, workers must wear appropriate approved respirators. Provision of other controls such as exhaust ventilation should be considered if practical.
Overalls which cover the body, arms and legs should be worn. Skin should not be exposed. Barrier creams may help to protect areas which are difficult to cover such as the face and neck. They should however not be applied once exposure has occurred. Petroleum jelly based types such as Vaseline should not be used.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (see section 7).
No data available
Keep away from oxidising agents, strongly alkaline and strongly acid materials in order to avoid possible exothermic reactions.
high temperatures
oxidising agents, strongly alkaline and strongly acid materials
carbon monoxide, carbon dioxide, oxides of nitrogen and smoke
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- Paint
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for INTERFINE 691 RAL1023 TRAFF.YELLOW PTA?
The signal word is warning.
What is the physical form of INTERFINE 691 RAL1023 TRAFF.YELLOW PTA?
INTERFINE 691 RAL1023 TRAFF.YELLOW PTA is a liquid appearing as yellow liquid with yellow color. It has smell of solvent odor.
What is INTERFINE 691 RAL1023 TRAFF.YELLOW PTA used for?
Cosmetic finish coat
What are the hazard statements for INTERFINE 691 RAL1023 TRAFF.YELLOW PTA?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of INTERFINE 691 RAL1023 TRAFF.YELLOW PTA?
The melting point is Not Measured and the boiling point is 101 °C.