Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Spotcheck SKL-WP2 Aerosol
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 9SWV-R01N-5005-87A8
Identified Uses
Non-destructive testing. Restricted to professional users.
Uses advised against
This product is not recommended for any use other than the identified uses above.
Manufacturers & Suppliers
Magnaflux® (A Division of ITW Ltd)
manufacturer
Faraday Road, South Dorcan Industrial Estate, SN3 5HE Swindon, Wiltshire, United Kingdom
+44 (0)1793 524566
https://magnaflux.eu/en
Emergency Contacts
Emergency Contact
+44(0)203 394 9866
The National Poisons Information Service (NPIS)
0344 892 0111
24 hour service
NHS 111
111
24 hour service
NHS 24
112
24 hour service
NHS Direct
111
24 hour service
NHS Direct
0845 4647
24 hour service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C12-C15, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 920-107-4 | --- | 25 - 40% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 15 - 25% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 10 - 15% | Yes |
| Alcohols, C12-15-branched and linear, ethoxylated propoxylated | 120313-48-6 | 10 - 15% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 5 - 10% | Yes |
| Alcohols, C12-14-secondary, ethoxylated EC: 617-534-0 | 84133-50-6 | 5 - 10% | Yes |
| N-(2-hydroxypropyl)oleamide EC: 203-828-2 | 111-05-7 | 1 - 3% | Yes |
| 2-(4-methylcyclohex-3-en-1-yl)propan-2-ol (multi-constituent) EC: 701-188-3 | --- | 1 - 3% | Yes |
| Hydrocarbons, C10-C13, aromatics, < 1% naphthalene EC: 922-153-0 | --- | 1 - 3% | Yes |
| naphthalene EC: 202-049-5 | 91-20-3 | 0.01% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her.
Symptoms: breathing difficulties or irritation of the respiratory tract
Remove contaminated clothing and shoes immediately. Ensure to wash exposed skin thoroughly with water and soap. Skin cleanser can be used. If skin irritation occurs: Get medical advice/attention. Rinse with water until pain stops then continue to rinse for 30 minutes.
Symptoms: skin irritation
If in eyes: Flush eyes with plenty of water or salt water (20-30 °C) for at least 30 minutes and continue until irritation stops. Remove contact lenses. Make sure you flush under the upper and lower eyelids. Seek medical assistance immediately and continue flushing during transport.
Symptoms: irritation
IF SWALLOWED: Immediately call a POISON CENTER/doctor. Do not induce vomiting! If vomiting occurs, keep head facing down so that vomit does not get into the lungs. Call a doctor or ambulance.
Symptoms: Symptoms of chemical pneumonia
Immediate Medical Attention
Seek medical assistance immediately for eye contact. Immediately call a POISON CENTER/doctor for ingestion.
Medical Treatment
Bring this safety data sheet or the label from this product.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water mist.
Waterjets should not be used, since they can spread the fire.
Extremely flammable aerosol. Pressurised container. In a fire or if heated, a pressure increase will occur and the container may burst. In use may form flammable/explosive vapour-air mixture. Fire will result in dense smoke. Exposure to combustion products may harm your health.
Closed containers, which are exposed to fire, should be cooled with water.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Accidental releases always pose a serious risk of fire or explosion. Storages not yet ignited must be cooled by water mist. Remove flammable materials if conditions allow it. Ensure sufficient ventilation. Avoid direct contact with spilled substances. Ensure adequate ventilation, especially in confined areas.
Avoid discharge to lakes, streams, sewers, etc.
cleaning should be performed with normal cleaning agents. Avoid use of solvents.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid direct contact with the product. See section 8 'Exposure controls/personal protection' for information on personal protection.
10 - 30°C
Smoking, drinking and consumption of food is not allowed in the work area.
Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are located within easy reach.
Material: Nitrile, Glove thickness: 0,38 mm, Breakthrough time: > 480 min, Standards: EN374-2, EN16523-1, EN388
Type: Safety glasses with side shields, Standards: EN166
In case of inadequate ventilation: Type: AX, Colour: Brown, Standards: EN14387
Dedicated work clothing should be worn.
Provide adequate general and local exhaust ventilation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under the conditions, noted in section 7 "Handling and storage".
No data available.
None known.
Avoid static electricity. Do not expose to any forms of heat (e.g. solar radiation). May lead to excess pressure.
Strong acids, strong bases, strong oxidizing agents, and strong reducing agents.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS, flammable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Spotcheck SKL-WP2 Aerosol?
The signal word is danger.
What is the physical form of Spotcheck SKL-WP2 Aerosol?
Spotcheck SKL-WP2 Aerosol is a aerosol with red color. It has mild pine odor.
What is Spotcheck SKL-WP2 Aerosol used for?
Non-destructive testing. Restricted to professional users.
What are the hazard statements for Spotcheck SKL-WP2 Aerosol?
This substance has 6 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Spotcheck SKL-WP2 Aerosol?
The melting point is No data available and the boiling point is >230 °C.