Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FERROSAD cast steel shot to EN ISO 11124-4
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Blast cleaning, deburring, surface profiling and roughening
Uses advised against
There is no information on any uses advised against.
Manufacturers & Suppliers
Metalltechnik Schmidt GmbH & Co. KG
manufacturer
Schulstraße 41, D-70794 Filderstadt
+49 (0) 711 / 77 99 07 - 0
http://www.ferrosad.com
Emergency Contacts
Quality Assurance
+49 (0) 711 / 77 99 07 – 24
during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Ample supply of fresh air. If symptoms persist seek medical attention.
No action required.
Flush with clean running water, do not rub. Seek medical assistance for the removal of the particles from the eye.
Non-toxic, not relevant.
Immediate Medical Attention
None.
Medical Treatment
None.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguishing measures are to suit the environment.
Dust produced during blasting can cause a fire and explosion hazard.
Please note the accident prevention regulations (German UVV) „Blasting Work" (DGUV-R 100-500, Chapter 2.24) or similar.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See protective measures under point 7 and 8.
Pick up with a vacuum cleaner or magnetic cleaner (such as MTS-3000) for disposal or further use.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear suitable protective clothing, gloves and eye / face protection. When lifting bulk bags, necessary safety measures must be observed.
Store in dry place
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical protective measures and the application of suitable working procedures take precedence over the use of personal protective equipment.
Not required, skin care cream is recommended
Tightly fitting safety goggles
Dust mask of type FFP2 recommended
Foot Protection: Safety shoes recommended; Body Protection: Normal work clothes recommended
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is under normal conditions chemically stable.
See chapter 10.3.
Hazardous reactions cannot be excluded if in contact with: acids, alkalis and oxidizing agents.
No data available.
No data available.
No data available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FERROSAD cast steel shot to EN ISO 11124-4?
The signal word is no signal word.
What is the physical form of FERROSAD cast steel shot to EN ISO 11124-4?
FERROSAD cast steel shot to EN ISO 11124-4 is a solid appearing as ball shaped, solid, silver-grey, metallic, shiny with silver-grey, metallic, shiny color.
What is FERROSAD cast steel shot to EN ISO 11124-4 used for?
Blast cleaning, deburring, surface profiling and roughening
What is the melting point of FERROSAD cast steel shot to EN ISO 11124-4?
The melting point is ~1500°C and the boiling point is no data available.