Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Alu-Cast 85 HS
- Product Form
- Refractory castable
- Chemical Name
- Alumina
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
NV Gouda Vuurvast
manufacturer
Goudkade 16, 2802 AA Gouda, The Netherlands
+31(0)182591400
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alumina cement | 12042-68-1 | 10% | No |
| Alumina | 1327-43-1 | 50% | No |
| Amorphous silica | 7631-86-9 | 5% | No |
| Barium sulfate | 7727-43-7 | 15% | No |
| Aluminum oxide | 1344-28-1 | 25% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to a dust free area
Wash with soap and water
Dust should be flushed with clean water. Contact lenses should not be worn with dust in the air.
Not a normal way of entry. Drink large quantities of water and consult a doctor.
Immediate Medical Attention
consult a doctor
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
This product is non-flammable and will not support combustion.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special precautions
Normal clean-up procedure
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent dust formation and ensure adequate ventilation/dust extraction
Cool and dry
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear gloves
Wear safety glasses
Use respirators
Wear standard protection work clothing; S36: Wear suitable protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Moisture; may cause lumps. Cast pieces may be subjected to steam spalling if improperly cured, dried or fired. Contact NV Gouda Vuurvast for correct dry out procedure
Water; may cause lumps
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Material can be recycled or disposed according to local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This material does not require a hazard warning label in the EEC.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Alu-Cast 85 HS?
The signal word is no signal word.
What is the physical form of Alu-Cast 85 HS?
Alu-Cast 85 HS is a grey, dry mix, grains appearing as grey, dry mix, grains up to 6 mm, no odor with grey color. It has no odor odor.
What are the hazard statements for Alu-Cast 85 HS?
This substance has 7 hazard statements:
- Nuisance dust may occur, causing irritation to skin and upper respiratory tract.
- Product may dry skin.
- Product may contain trace amounts of crystalline silica.
- Long term exposure to crystalline silica can cause silicosis, bronchitis and lung damage.
- Eye Dust may be dangerous for the eyes
- Skin May dry and irritate skin
- Inhalation During mixing, dust will be developed and may cause irritation.
What is the melting point of Alu-Cast 85 HS?
The melting point is >2000 [°C] .