Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium hexametaphosphate
- Product Code
- S/4160/53, S/4160/60
- Chemical Name
- Sodium hexametaphosphate
- Synonyms
- Sodium Hexametaphosphate.; Metaphosphoric Acid Hexasodium Salt
Regulatory Identifiers
- CAS Number
- 10124-56-8 Check regulations →
- EC Number
- 233-343-1 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Fisher Scientific UK
distributor
Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom
Thermo Fisher Scientific
distributor
Janssen Pharmaceuticalaan 3a, 2440 Geel, Belgium
Emergency Contacts
Emergency Contact
01509 231166
Chemtrec US
(800) 424-9300
Chemtrec EU
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hexametaphosphate | 10124-56-8 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Get medical attention immediately if symptoms occur.
Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Clean mouth with water and drink afterwards plenty of water. Get medical attention if symptoms occur.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Should not be released into the environment. See Section 12 for additional Ecological Information.
Sweep up and shovel into suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Sodium Tripolyphosphate
CAS: Mixture
Sodium tripolyphosphate
CAS: 7758-29-4
Sodium pyrophosphate
CAS: 7722-88-5
Sodium pyrophosphate
CAS: 7722-88-5
Sodium pyrophosphate
CAS: 7722-88-5
Sodium hydrogen phosphate
CAS: 7558-79-4
Sodium dihydrogen phosphate monohydrate
CAS: 10049-21-5
Sodium dihydrogen phosphate monohydrate
CAS: 10049-21-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Ensure adequate ventilation. Avoid ingestion and inhalation. Avoid contact with skin, eyes or clothing. Avoid dust formation.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location.
Protective gloves. Glove material: Natural rubber (Breakthrough time: See manufacturers recommendations, EU standard: EN 374, comments: minimum requirement), Nitrile rubber, Neoprene PVC.
Wear safety glasses with side shields (or goggles) (European standard - EN 166)
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particle filter. Small scale/Laboratory use: Maintain adequate ventilation
Long sleeved clothing.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
Hazardous polymerization does not occur. None under normal processing.
Incompatible products. Excess heat. Avoid dust formation.
Strong oxidizing agents.
Sodium oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Sodium hexametaphosphate known by?
Sodium hexametaphosphate is also known as: Sodium Hexametaphosphate.; Metaphosphoric Acid Hexasodium Salt
What is the hazard signal word for Sodium hexametaphosphate?
The signal word is no signal word.
What is the physical form of Sodium hexametaphosphate?
Sodium hexametaphosphate is a solid appearing as white . It has odorless odor.
What is Sodium hexametaphosphate used for?
Laboratory chemicals.
What is the melting point of Sodium hexametaphosphate?
The melting point is 640 °C / 1184 °F and the boiling point is Not applicable.