Sodium pyrophosphate

Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse skin with water/shower. In all cases of doubt, or when symptoms persist, seek medical advice.

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.

Symptoms: Risk of blindness, Risk of serious damage to eyes

Rinse mouth with water (only if the person is conscious). Call a doctor.

Symptoms: Vomiting

co-ordinate firefighting measures to the fire surroundings! water, foam, dry extinguishing powder, ABC-powder

water jet

Non-combustible.

Fight fire with normal precautions from a reasonable distance.

Use personal protective equipment as required. Avoid contact with skin, eyes and clothes. Do not breathe dust.

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Take up mechanically.

Avoid dust formation.

Store in a dry place.

Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs.

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 ° C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. Type of material: NBR (Nitrile rubber). Material thickness: >0,11 mm. Breakthrough times of the glove material: >480 minutes (permeation: level 6)

Use safety goggle with side protection.

Respiratory protection necessary at: Dust formation. Particulate filter device (EN 143). P2 (filters at least 94 % of airborne particles, colour code: White).

Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.

Keep away from drains, surface and ground water.

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

This material is not reactive under normal ambient conditions.

Violent reaction with: strong oxidiser

There are no specific conditions known which have to be avoided.

There is no additional information.

Hazardous combustion products: see section 5.