Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PAINT AND GRAFFITI REMOVER
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaners - Heavy duty
Manufacturers & Suppliers
CRC Industries UK Ltd.
national supplier
Wylds Road, Castlefield Industrial Estate, TA6 4DD Bridgwater Somerset, United Kingdom
+44 1278 727200
Emergency Contacts
Emergency Contact
(+44)(0)1278 72 7200
office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-methoxy-2-propanol; monopropylene glycol methyl ether EC: 203-539-1 | 107-98-2 | 30 - 60% | Yes |
| ethanol; ethyl alcohol EC: 200-578-6 | 64-17-5 | 10 - 30% | Yes |
| Hydrocarbons,C3-4-rich, petroleum distillate Petroleumgas (1,3-butadiene < 0.1%) EC: 270-990-9 | 68512-91-4 | 10 - 30% | Yes |
| butanone; ethyl methyl ketone EC: 201-159-0 | 78-93-3 | 10 - 30% | Yes |
| methanol EC: 200-659-6 | 67-56-1 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Symptoms: Excessive inhalation of solvent vapours may give rise to nausea, headaches and dizziness
Take off contaminated clothing and wash before reuse. Wash with plenty of soap and water.
Symptoms: May cause irritation. Symptoms : redness and pain
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: Irritating to eyes Symptoms : redness and pain
If swallowed accidentally, do not induce vomiting.
Symptoms: May cause gastrointestinal disturbances Symptoms : sore throat, abdominal pain, nausea, vomiting
Immediate Medical Attention
If eye irritation persists: Get medical advice/attention. If skin irritation occurs: Get medical advice/attention. Call a POISON CENTER or doctor/physician if you feel unwell. Seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, carbon dioxide or dry agent
Aerosols may explode if heated above 50°C
Keep container(s) exposed to fire cool, by spraying with water
Firefighter Protection
In case of fire, do not breathe fumes
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter public sewers and watercourses
Absorb spillage in suitable inert material
Materials: suitable inert material
Related Products
Similar products with comparable safety profiles
SCRUBS® Graffiti & Spray Paint Remover Towels
---
ANTI GRAFFITI C1 500ML QUICK TECH
UFI: EEGD-K3GF-ANCD-JFVP
JASCO PREMIUM PAINT & EPOXY REMOVER
---
ANTI GRAFFITI C2 500MLX6 QUICK TECH
UFI: XUJR-43DC-FNCW-HYSR
SPRAY PAINT
---
ANTI GRAFFITI C3 500MLX6 QUICK TECH
UFI: 4XJR-N32R-SNCE-5ACT
Klean-Strip Aircraft Paint Remover
---
RUST REMOVER
UFI: C1DX-R83C-Y00F-57XY
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and sources of ignition. Take precautionary measures against static discharges. Do not breathe aerosols or vapours. Avoid contact with skin and eyes. Wash thoroughly after use. Wear protective gloves/protective clothing/eye protection/face protection.
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C. Keep out of reach of children.
Wash thoroughly after use. Eyewash bottles should be available.
Keep away from heat and sources of ignition. Take precautionary measures against static discharges. Equipment should be earthed. Use only non-sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation; Keep away from heat and sources of ignition; Take precautionary measures against static discharges
Wear suitable protective gloves; When handling the product wear chemical-resistant gloves (standard EN 374). The breakthrough time of the glove should be longer than the total duration of product use. If work lasts longer than the breakthrough time, gloves should be changed part-way through. Recommended gloves: (butyl rubber)
Wear safety eyewear according to EN 166.
In case of insufficient ventilation, wear suitable respiratory equipment. Air purifying respirator equipped with organic gas/vapor cartridge (type A)
When handling the product wear chemical-resistant gloves (standard EN 374). The breakthrough time of the glove should be longer than the total duration of product use. If work lasts longer than the breakthrough time, gloves should be changed part-way through.
Avoid release to the environment. Collect spillage.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No hazardous reactions known if used for its intended purpose
No hazardous reactions known if used for its intended purpose
Avoid overheating
Strong oxidising agent
CO,CO2
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PAINT AND GRAFFITI REMOVER?
The signal word is danger.
What is the physical form of PAINT AND GRAFFITI REMOVER?
PAINT AND GRAFFITI REMOVER is a propane/butane propelled liquid. with colorless. color. It has characteristic odor. odor.
What is PAINT AND GRAFFITI REMOVER used for?
Cleaners - Heavy duty
What are the hazard statements for PAINT AND GRAFFITI REMOVER?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.