Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- QWIKJOINT UVR STANDARD GRAY 1:1 PART B
- Product Code
- 693HP 5B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Curative
Uses advised against
Not known.
Manufacturers & Suppliers
EUCLID CHEMICAL COMPANY
manufacturer
19218 REDWOOD ROAD, CLEVELAND OH 44110, US
216-531-9222
Emergency Contacts
Emergency Contact
1-800-424-9300
Emergency Contact
1-613-996-6666
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Diisodecyl phthalate | 26761-40-0 | 50 - 100% | No |
| Diethyltoluenediamine | 68479-98-1 | 5 - 10% | No |
| Talc | 14807-96-6 | 1 - 5% | No |
| Propoxylated Amine | 102-60-3 | 1 - 5% | No |
| Amorphous silica | 7631-86-9 | 1 - 5% | No |
| Titanium dioxide | 13463-67-7 | 0.1 - 1% | No |
| Dibutyl tin dilaurate | 77-58-7 | 0.3 - 1% | No |
| Hydroxyphenyl-benzatriazole | 104810-48-2 | 0.1 - 1% | No |
| Hydroxyphenyl-benzatriazole | 104810-47-1 | 0.1 - 1% | No |
* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Get medical attention if symptoms occur. Destroy or thoroughly clean contaminated shoes. Immediately remove contaminated clothing and shoes and wash skin with soap and plenty of water. If skin irritation or an allergic skin reaction develops, get medical attention.
Symptoms: May cause skin irritation.
Immediately flush with plenty of water for at least 15 minutes. If easy to do, remove contact lenses. Get medical attention.
Symptoms: May cause eye irritation.
Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
Immediate Medical Attention
Get medical attention if symptoms occur.
Medical Treatment
Symptoms may be delayed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media appropriate for surrounding materials.
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
No data available.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Keep unauthorized personnel away.
Do not contaminate water sources or sewer. Prevent further leakage or spillage if safe to do so. Avoid release to the environment.
Collect spillage in containers, seal securely and deliver for disposal according to local regulations.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Avoid contact with eyes. Wash hands thoroughly after handling. Do not handle until all safety precautions have been read and understood. Obtain special instructions before use. Use personal protective equipment as required. Avoid contact with eyes, skin, and clothing.
Store locked up.
Observe good industrial hygiene practices. Avoid contact with eyes. Do not handle until all safety precautions have been read and understood. Obtain special instructions before use. Contaminated work clothing should not be allowed out of the workplace. Avoid contact with skin.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
No data available.
No data available.
Avoid heat or contamination.
Avoid contact with acids.
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for QWIKJOINT UVR STANDARD GRAY 1:1 PART B?
The signal word is danger.
What is the physical form of QWIKJOINT UVR STANDARD GRAY 1:1 PART B?
QWIKJOINT UVR STANDARD GRAY 1:1 PART B is a liquid with gray color. It has mild pungent odor.
What is QWIKJOINT UVR STANDARD GRAY 1:1 PART B used for?
Curative
What are the hazard statements for QWIKJOINT UVR STANDARD GRAY 1:1 PART B?
This substance has 5 hazard statements:
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H360Df: May damage the unborn child. Suspected of damaging fertility.
- H372: May cause damage to organs through prolonged or repeated exposure.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of QWIKJOINT UVR STANDARD GRAY 1:1 PART B?
The melting point is No data available. and the boiling point is No data available..