Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- QWIKJOINT UVR
- Product Code
- 693HP 5A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Curative
Uses advised against
Not known.
Manufacturers & Suppliers
EUCLID CHEMICAL COMPANY
manufacturer
19218 REDWOOD ROAD, CLEVELAND OH 44110, US
216-531-9222
Emergency Contacts
Emergency Contact
1-800-424-9300
Emergency Contact
1-613-996-6666
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 4,4'-Methylene bis(phenylisocyanate) | 101-68-8 | 10 - 20% | No |
| Diphenylmethane diisocyanate | 26447-40-5 | 10 - 20% | No |
* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
First Aid Measures
Emergency procedures for chemical exposure incidents
Call a physician or poison control center immediately. If breathing stops, provide artificial respiration. Move to fresh air. If breathing is difficult, give oxygen.
Symptoms: Respiratory tract irritation.
Get medical attention. Destroy or thoroughly clean contaminated shoes. Immediately remove contaminated clothing and shoes and wash skin with soap and plenty of water. If skin irritation or an allergic skin reaction develops, get medical attention.
Symptoms: Prolonged or repeated contact with skin may cause redness, itching, irritation and eczema/chapping.
Immediately flush with plenty of water for at least 15 minutes. If easy to do, remove contact lenses. Get medical attention.
Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
Immediate Medical Attention
Call a physician or poison control center immediately.
Medical Treatment
Symptoms may be delayed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media appropriate for surrounding materials.
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
No data available.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate closed spaces before entering them. Evacuate area. Keep upwind. Keep unauthorized personnel away. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing.
Do not contaminate water sources or sewer. Prevent further leakage or spillage if safe to do so.
Collect spillage in containers, seal securely and deliver for disposal according to local regulations.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Do not handle until all safety precautions have been read and understood. Obtain special instructions before use. Use personal protective equipment as required. Avoid contact with eyes. Wash hands thoroughly after handling. Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact with skin. Avoid contact with eyes, skin, and clothing.
Store locked up.
Observe good industrial hygiene practices. Wash hands before breaks and immediately after handling the product. Avoid contact with eyes. Wash contaminated clothing before reuse. Avoid contact with skin. Contaminated work clothing should not be allowed out of the workplace.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
No data available.
No data available.
Avoid heat or contamination.
Alcohols. Amines. Strong acids. Strong bases. Water, moisture.
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for QWIKJOINT UVR?
The signal word is danger.
What is the physical form of QWIKJOINT UVR?
QWIKJOINT UVR is a liquid with colorless color. It has mild odor.
What is QWIKJOINT UVR used for?
Curative
What are the hazard statements for QWIKJOINT UVR?
This substance has 8 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H335: May cause respiratory irritation.
- H351: Suspected of causing cancer.
- H372: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of QWIKJOINT UVR?
The melting point is No data available. and the boiling point is No data available..