Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Paint-Riter ™ + Heat Treat (2100F, 2200F) White, Yellow, Black, Blue
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Marking.
Uses advised against
No additional information available
Manufacturers & Suppliers
LA-CO Industries, Inc.
manufacturer
1201 Pratt Boulevard, Elk Grove Village, IL. 60007-5746
(847) 956-7600
Emergency Contacts
CHEMTREC- U.S.
1-800-424-9300
24-hour emergency
CHEMTREC International
+1-703-527-3887
24-hour emergency
全国应急中心
0532 8388 9090
24-hour emergency
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethyl carbonate | 616-38-6 | 15 - 45% | Yes |
| Titanium dioxide | 13463-67-7 | 40% | Yes |
| Cyclohexanone | 108-94-1 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled and if breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: Inhalation of vapours may cause respiratory irritation.
Wash skin thoroughly with mild soap and water. Take off contaminated clothing and wash it before reuse.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Do NOT induce vomiting. Call a POISON CENTER/doctor if you feel unwell.
Symptoms: Like any product not designed to be ingested, this product may cause stomach distress if ingested in large quantities.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing media appropriate for surrounding fire.
None known.
Burning produces irritating, toxic and noxious fumes. Carbon oxides (CO, CO2). Highly flammable liquid and vapour. Heavier than air, vapours may travel long distances along ground, ignite and flash back to source. Flammable vapours may accumulate in the container. May form flammable/explosive vapour-air mixture. Heat may build pressure, rupturing closed containers.
Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Use self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Avoid release to the environment.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Take up in non-combustible absorbent material and shove into container for disposal.
Materials: inert solids, such as clay or diatomaceous earth, non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a well-ventilated area. Do not breathe aerosol. Do not breathe vapours. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Keep away from open flames, hot surfaces and sources of ignition.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
No open flames. No smoking. Use only non-sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
None under normal use. In case of repeated or prolonged contact wear gloves. Nitrile rubber
None under normal use. In case of splashing or aerosol production: protective goggles.
None under normal use
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Highly flammable liquid and vapour. May form flammable/explosive vapour-air mixture.
No dangerous reactions known.
Hazardous polymerization will not occur.
Open flame. Direct sunlight.
Oxidizing agent. Moisture. Alkali. acid.
May release flammable gases. Thermal decomposition generates : metallic oxides. Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Paint-Riter ™ + Heat Treat (2100F, 2200F) White, Yellow, Black, Blue?
The signal word is danger.
What is the physical form of Paint-Riter ™ + Heat Treat (2100F, 2200F) White, Yellow, Black, Blue?
Paint-Riter ™ + Heat Treat (2100F, 2200F) White, Yellow, Black, Blue is a liquid appearing as solid marker containing liquid colored paint. with various color. It has solvent odor.
What is the solubility of Paint-Riter ™ + Heat Treat (2100F, 2200F) White, Yellow, Black, Blue?
No data available
What is Paint-Riter ™ + Heat Treat (2100F, 2200F) White, Yellow, Black, Blue used for?
Marking.
What are the hazard statements for Paint-Riter ™ + Heat Treat (2100F, 2200F) White, Yellow, Black, Blue?
This substance has 1 hazard statement:
- H225: Highly flammable liquid and vapour.
What is the melting point of Paint-Riter ™ + Heat Treat (2100F, 2200F) White, Yellow, Black, Blue?
The melting point is No data available and the boiling point is 90 °C.