Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Paint-Riter ™ + Oily Surface Light Blue, Light Green, Pink, White, Yellow
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Marking.
Uses advised against
No additional information available
Manufacturers & Suppliers
Weldclass Welding Products
manufacturer
6 East West Place Tamworth NSW 2340
02 6764 9590
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
+1-703-527-3887
全国应急中心
0532 8388 9090
Vergiftungsinformationszentrale (Poisons Information Centre)
+43 1 406 43 43
The Belarus Republican Poisons Centre
+375 (0)17 201 9158
Centre Anti-Poisons/Antigifcentrum c/o Hôpital Central de la Base - Reine Astrid
+32 70 245 245
Национален токсикологичен информационен център National Clinical Toxicology Centre, Emergency Medical Institute "Pirogov"
+359 2 9154 409
Poisons Control Centre Institute of Medical Research & Occupational Health
+385 1 234 8342
Toxikologické informační středisko Clinic For Occupational Medicine, 1st Medical Faculty, Charles University
+42 2 2491 9293
Toxikologické informační středisko Clinic For Occupational Medicine, 1st Medical Faculty, Charles University
+42 2 2491 5402
Giftlinjen Bispebjerg Hospital
+45 82 12 12 12
Giftlinjen Bispebjerg Hospital
+45 35 31 55 55
Mürgistusteabekeskus
+372 626 93 90
Myrkytystietokeskus
+358 9 471 977
ORFILA
+33 1 45 42 59 59
Berliner Betrieb für Zentrale Gesundheitliche Aufgaben
+49 30 19240
Informations und Beratungszentrum für Vergiftungsfälle
+49 6841 19240
Beratungsstelle bei Vergiftungen, Klinische Toxikologie und Beratungsstelle bei Vergiftungen
+49 6131 19240
Poisons Information Centre
+30 10 779 3777
Országos Kémiai Biztonsági Intézet (National Institute of Chemical Safety) Egészségügyi Toxikológiai Tájékoztató Szolgálat (Health Toxicological Information Service)
+36 80 20 11 99
Eitrunarmiöstöön
+354 543 22 22
National Poisons Information Centre
+353 1 809 2166
Valsts Toksikoloģijas centra Saindēšanās un zāļu informācijas centrs
+371 67 04 24 73
Apsinuodijimų kontrolės ir informacijos biuras
+370 5 236 20 52
Apsinuodijimų kontrolės ir informacijos biuras
+370 687 53 378
Medicines & Poisons Info Office
25450000
Nationaal Vergiftigingen Informatie Centrum National Institute for Public Health and the Environment
+31 30 274 88 88
Centro de Informação Antivenenos Instituto Nacional de Emergência Médica (INEM)
808 250 143
Centro de Informação Antivenenos Instituto Nacional de Emergência Médica (INEM)
+351 21 330 3284
Biroul pentru Regulamentul Sanitar International si Informare Toxicologica
+40 21 318 36 06
Národné toxikologické informačné centrum University Hospital Bratislava
+421 2 54 77 4 166
Servicio de Información Toxicológica Instituto Nacional de Toxicología, Departamento de Madrid
+34 91 562 04 20
Giftinformationscentralen Swedish Poisons Information Centre, Karolinska Hospital
+46 8 33 12 31
Giftinformationscentralen Swedish Poisons Information Centre, Karolinska Hospital
112
Centre Suisse d'Information Toxicologique
+41 44 251 51 51
Centre Suisse d'Information Toxicologique
145
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Cyclohexanone EC: 203-631-1 | 108-94-1 | 20 - 30% | Yes |
| Titanium dioxide EC: 236-675-5 | 13463-67-7 | 15 - 45% | No |
| pentan-2-one EC: 203-528-1 | 107-87-9 | 1 - 25% | Yes |
| Silicon dioxide (amorphous) EC: 231-545-4 | 7631-86-9 | 5% | No |
| Aluminum hydroxide EC: 244-492-7 | 21645-51-2 | 5% | No |
| 4-[[4-(aminocarbonyl)phenyl]azo]-N-(2-ethoxyphenyl)-3-hydroxynaphthalene-2-carboxamide, C.I. Pigment Red 170 (naphthol <1%) EC: 220-509-3 | 2786-76-7 | 2% | Yes |
| Ethyl acetate EC: 205-500-4 | 141-78-6 | 0.1 - 1% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 0.1 - 0.5% | Yes |
| Aluminum oxide EC: 215-691-6 | 1344-28-1 | 1% | No |
| [N,N,N',N',N'',N''-hexaethyl-29H,31H-phthalocyaninetrimethylaminato(2-)-N29,N30,N31,N32]copper EC: 249-125-4 | 28654-73-1 | 0.5% | Yes |
| barium sulfate EC: 231-784-4 | 7727-43-7 | 0.1% | No |
| Butyl acetate EC: 204-658-1 | 123-86-4 | 0.1% | Yes |
| Toluene EC: 203-625-9 | 108-88-3 | 0.1% | Yes |
| 2-methoxypropyl acetate EC: 274-724-2 | 70657-70-4 | 0.1% | Yes |
| 2-methylpropan-1-ol EC: 201-148-0 | 78-83-1 | 0.1% | Yes |
| Hexachlorobenzene EC: 204-273-9 | 118-74-1 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled and if breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: Inhalation may cause: irritation, coughing, shortness of breath.
Gently wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: Causes serious eye irritation.
Rinse mouth. Call a POISON CENTER/doctor if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing media appropriate for surrounding fire.
None known.
Highly flammable liquid and vapour. Heavier than air, vapours may travel long distances along ground, ignite and flash back to source. Flammable vapours may accumulate in the container. Heat may build pressure, rupturing closed containers.
Exercise caution when fighting any chemical fire. In case of fire: stop leak if safe to do so. Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Use self-contained breathing apparatus. EN469.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Avoid release to the environment.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Take up in non-combustible absorbent material and shove into container for disposal.
Materials: inert solids, such as clay or diatomaceous earth; non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Paint-Riter ™ + Heat Treat (2100F, 2200F) White, Yellow, Black, Blue
---
PRO-LINE® Fine Line, PRO-LINE® Microline, PRO-MAX™, POCKET, and SL.100 PAINT MARKER - Blue, Green, Light Green, Orange, Red, Yellow, Pink, Grey, Silver, Purple, Gold, Light Blue, and Brown
---
Paint, Black, HT-AL 9400
---
Linemarker Paint - All Colours
---
H Paintstik® Black
---
Paint Thinner
---
Oil Zone Marking Paint Interior/Exterior Yellow
---
Pro-Line® HP Paint Markers
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a well-ventilated area. Do not breathe vapours. Avoid contact with skin and eyes. Do not breathe aerosol.
Keep container tightly closed. Keep away from open flames, hot surfaces and sources of ignition.
Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
No open flames. No smoking. Use only non-sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local exhaust ventilation of closed transfer systems to minimize exposures. Avoid creating mist or spray. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.
In case of repeated or prolonged contact wear gloves. Butyl rubber gloves. short term. nitrile rubber gloves. EN374
Chemical goggles or safety glasses. EN166
None under normal use
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Highly flammable liquid and vapour.
No dangerous reactions known.
Hazardous polymerization will not occur.
Keep away from sources of ignition.
Oxidizing agent. Moisture. Alkali. acid.
Thermal decomposition generates : metallic oxides. Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Paint-Riter ™ + Oily Surface Light Blue, Light Green, Pink, White, Yellow?
The signal word is danger.
What is the physical form of Paint-Riter ™ + Oily Surface Light Blue, Light Green, Pink, White, Yellow?
Paint-Riter ™ + Oily Surface Light Blue, Light Green, Pink, White, Yellow is a liquid appearing as opaque liquid. with variable. color. It has solvent. odor.
What is the solubility of Paint-Riter ™ + Oily Surface Light Blue, Light Green, Pink, White, Yellow?
No data available
What is Paint-Riter ™ + Oily Surface Light Blue, Light Green, Pink, White, Yellow used for?
Marking.
What are the hazard statements for Paint-Riter ™ + Oily Surface Light Blue, Light Green, Pink, White, Yellow?
This substance has 2 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
What is the melting point of Paint-Riter ™ + Oily Surface Light Blue, Light Green, Pink, White, Yellow?
The melting point is No data available and the boiling point is 103 °C.